Description
Anyone who reloads knows the sinking feeling of a case getting stuck halfway into a sizing die. Frankford Arsenal Case Lube in the 8 oz. pump bottle is built to keep that from happening. It's an isopropyl-based liquid that you spray on lightly, give about a minute to set up, and then run through the press. That quick prep step is the whole point, and it's what makes bulk sizing sessions go a lot smoother.
What Sets the Frankford Arsenal Case Lube Pump Apart
The non-aerosol pump gives you real control over how much you're laying down, so you're not fogging your whole bench or soaking the brass. A light, even mist across the case body is all it takes. Because the formula dries fast and doesn't leave things tacky, you're not stuck wiping every case down afterward. Reloaders who've switched over from older pad-and-wax methods tend to point out how much quicker and less messy the spray approach is.
Getting the Most From Your 8 oz. Case Lube
Application is simple. Stand your brass up in a loading block or lay it out on a towel, give it a light coat, rotate and hit the other side, then wait roughly a minute before sizing. The lube is designed to protect your dies and your brass while keeping powder and primers clean when you use it as directed. Worth knowing: this is a solvent-based lube, so if you tumble in wet media, a little citric acid cleaner in the mix strips it right off with no oily film left behind.
The 8 oz. bottle is a sensible size for a home bench. A little goes a long way, so one pump bottle will carry you through a whole lot of rifle and pistol brass before you need a refill. If you size a lot of bottleneck cases like .223 or .308, this is the kind of no-drama supply that just earns its spot in the reloading area.
Key Specifications
- Manufacturer: Frankford Arsenal
- Manufacturer Part Number: 460478
- UPC: 661120439967
- Volume: 8 oz.
- Type: Non-Aerosol Pump Spray
- Base: Isopropyl / Solvent-Based
- Use: Case body lubrication before resizing
- Dry Time: Approximately 1 minute
- Shipping Weight: 0.53 lbs
What’s Included
- Frankford Arsenal Case Lube, 8 oz. non-aerosol pump bottle
Frequently Asked Questions
How do I use the Frankford Arsenal Case Lube pump?
Stand your brass in a loading block or lay it out, then spray a light, even coat over the case body and rotate to cover all sides. Wait about a minute for it to dry, then run the cases through your sizing die. A light coat is all you need, so avoid oversaturating the brass.
Will this case lube contaminate my powder or primers?
When applied lightly and as directed to the case body, the formula is designed to keep from contaminating powder and primers. The key is a light coat rather than soaking the cases. Keeping the lube off the case mouth and neck interior helps too.
Does the Frankford Arsenal Case Lube leave a sticky residue?
No. It's a fast-drying formula that doesn't leave the tacky film you get from some older lubes, so brass doesn't feel greasy after sizing. It's a solvent-based lube, so if you wet tumble afterward, adding a citric acid cleaner to your media strips it off cleanly with no oily leftover.
How many cases will the 8 oz. bottle lube?
Since only a light mist is needed per case, a little goes a long way. The 8 oz. pump bottle will handle a large volume of rifle and pistol brass before running dry, making it a practical size for a home reloading bench.





Reviews
There are no reviews yet.