$37.95
11 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Fortis took a hard look at one of the most overlooked parts of an AR-15 build and made it better. The Lightweight Enhanced end plate teams up with the tapered K1 castle nut to solve the classic staking headache. Instead of punching metal to keep the castle nut from walking loose, the two pieces are machined so the tapered outer surface of the nut wedges into the matching taper inside the end plate. That friction fit locks everything down and, just as importantly, it comes apart cleanly when you need to service the lower later on.
The wedging action is the whole story here. There are no set screws, no ratcheting teeth, and nothing to stake. You still snug it down with your armorer's wrench, but the design is what keeps it locked through recoil and repeated take-apart cycles. Fortis notes you don't need a torque wrench, and if you do reach for one, keep it light at around 15 to 20 ft-lbs, which is well under what a standard castle nut calls for. Builders who've swapped over from mil-spec parts consistently mention how easy it is to install and how solid it feels once seated.
Both the castle nut and end plate are cut from 7075-T6 aircraft-grade aluminum, and the complete set weighs in at only .59 oz. For anyone chasing every ounce on a lightweight build, that's a real difference over steel hardware. The end plate also carries a 360-degree quick detach socket, so you can run a QD sling swivel and rotate it however your setup demands without it binding up.
This system is made for standard AR-15 and M16 pattern lowers running a carbine or mil-spec buffer tube. It's a favorite among folks who tinker with their rifles often, since pulling the stock assembly for cleaning or parts changes no longer means grinding out staking marks. Made in the USA and finished in a clean black anodize, it looks as sharp as it functions.
No. The K1 system uses a tapered castle nut that wedges into the matching taper inside the LE end plate, creating a friction fit that keeps it from backing out. That means no staking, no set screws, and no ratcheting hardware to fuss with. It's one of the main reasons builders choose this setup.
Fortis says a torque wrench isn't required and that you can simply tighten roughly a quarter turn past hand tight. If you prefer to use a torque wrench, keep it around 15 to 20 ft-lbs, which is noticeably lighter than a standard castle nut. You'll still want an armorer's wrench to snug it down properly.
It's designed for standard AR-15 and M16 pattern lowers using a carbine or mil-spec diameter buffer tube. The end plate also includes a 360-degree quick detach socket, so you can run a QD sling swivel if you'd like. If your rifle uses standard mil-spec components, this system should drop right in.
The complete Fortis K1 castle nut and end plate set weighs just .59 oz, since both pieces are machined from 7075-T6 aluminum instead of steel. That's a meaningful cut for anyone building a lightweight rifle. You get the weight savings without giving up a secure, no-backout lockup.
| UPC | 855476008247 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LE-BLK-K1-BLK |
| Color | Black |
| Model | |
| Product Type | End Plate |
You must be logged in to post a review.
Reviews
There are no reviews yet.