Description
The Forster Outside Neck Turner Pilot #264 is the mandrel that handles the real work when you're turning 6.5mm case necks on the Forster Case Trimmer. It replaces your standard case trimmer pilot and gives the brass a true centerline to ride on while the cutter shaves the outside of the neck. The result is necks with even wall thickness and a consistent outside diameter, which is what you're after if you've ever chased down flyers or uneven bullet release.
This pilot is made for .264 diameter bullets, covering the popular 6.5mm family including rounds like the 6.5 Creedmoor, 6.5 PRC, .260 Remington, and the various 6.5mm wildcats. Like all of Forster's neck turning pilots, it's precision ground roughly .0020 to .0025 inch under bullet diameter so the case neck seats snug without binding. The steel is hardened, so it holds its dimensions cut after cut and shrugs off wear even with heavy use.
Why the #264 Pilot Earns Its Keep at the Bench
When a case neck is thicker on one side than the other, the thin side lets go of the bullet a hair early and nudges things out of alignment with the bore. That small inconsistency shows up on target. Turning the neck true to the case axis evens out those wall variations, so the bullet releases cleanly and starts straight. For anyone loading precision 6.5mm, that uniformity is a meaningful step up.
Fitment You Need to Get Right
This is the pilot built for the trimmer-mounted Outside Neck Turner that attaches to the Forster Original or Power Case Trimmer. It is not interchangeable with the Hand-Held Outside Neck Turning Tool, which uses a different pilot entirely. If you're running the trimmer-based setup, this is the correct .264 piece. Made in the USA by Forster Products, who have been turning out quality reloading gear for decades.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: OT2264
- UPC: 757253005152
- Model: Outside Neck Turner Pilot #264
- Caliber: .264 / 6.5mm
- Bullet Diameter: 0.264 in
- Pilot Diameter: Approx. 0.2615 in (.0020 to .0025 in under bullet diameter)
- Material: Hardened, precision-ground steel
- Fitment: Forster Original and Power Case Trimmer Outside Neck Turner
- Country of Origin: USA
What’s Included
- Forster Outside Neck Turner Pilot #264 (.264 caliber)
Frequently Asked Questions
What does the Forster Outside Neck Turner Pilot #264 fit?
This pilot is designed for the Outside Neck Turner accessory that mounts on the Forster Original or Power Case Trimmer. It replaces the standard case trimmer pilot during neck turning operations. It will not work with the Forster Hand-Held Outside Neck Turning Tool, which takes a different pilot.
What calibers does the #264 pilot cover?
It's made for .264 diameter bullets, which covers the 6.5mm family. That includes popular cartridges like the 6.5 Creedmoor, 6.5 PRC, .260 Remington, and various 6.5mm wildcats.
Why is the pilot made smaller than .264?
Forster grinds its neck turning pilots roughly .0020 to .0025 inch under bullet diameter. That slight undersize lets the case neck slide onto the pilot snugly without binding, giving the cutter a true, stable surface to work against for even wall thickness.
Will this pilot hold up to a lot of use?
Yes. It's made from hardened, precision-ground steel, so it keeps its dimensions cut after cut and resists wear over the long haul. Reloaders who have run these for years report they stay true and don't wear out.




Reviews
There are no reviews yet.