Description
The Forster Original Case Trimmer has earned its reputation the old fashioned way, by showing up on reloading benches for decades and doing the job right. It works like a fine mini lathe, holding your brass in a Brown & Sharpe-type collet while the cutter shaft squares off the case mouth. That collet is what sets it apart from the crowd. Instead of gripping the rim, it holds the case body, so your trim depth stays consistent even when rim diameters wander from one piece of brass to the next.
What Makes the Original Case Trimmer Tick
The heart of this tool is the high-alloy steel cutter shaft with four staggered-tooth cutting edges. That design gives you fast, smooth, chatter-free cuts and a bright, square case mouth every time. Each bearing is hand-honed to fit the shaft, so you get a precision feel right out of the box. Between the coarse and fine adjustments built into the stop collar, you can dial in your trim length and hold .001 inch repeatability, which is exactly what you want when you are chasing consistent case volume and overall length.
Caliber Range and Setup Notes
The Original handles most standard calibers from .171 inch to .459 inch, which covers everything from the little 5.7×28 up through 45-70. It uses Collets #1 through #4 and ships on the standard 5-3/8 inch base. One thing worth knowing up front: this trimmer requires a collet and pilot for each case you want to trim, and those are sold separately. If you plan to run .17 caliber, you will also need the dedicated 17 cal cutter shaft.
More Than Just a Trimmer
This is a genuine do-it-all case prep tool. Beyond length trimming, it handles hollow pointing, neck turning, inside neck reaming, case mouth deburring, and primer pocket reaming for removing military crimps. If you would rather not crank by hand on a big batch, the Forster Power Adapter lets you run it off a drill or power screwdriver. Made in the USA and built to last, the Original is the kind of tool you buy once and hand down.
Key Specifications
- Manufacturer: Forster Products
- Model / MPN: CT1010
- UPC: 757253003615
- Bullet Diameter Range: .171 in to .459 in
- Caliber Range: .17 caliber to .458 caliber (fits 5.7×28 through 45-70)
- Maximum Case Length: 2.94 in
- Trim Repeatability: 0.001 in
- Cutter Shaft Diameter: 0.490 in
- Cutting Design: Four staggered-tooth cutting edges, high-alloy steel shaft
- Case Holding System: Brown & Sharpe-type collet
- Compatible Collets: #1 through #4
- Base Length: 5-3/8 in standard base
- Adjustment: Coarse and fine trim length adjustments
- Material: Steel with extruded aluminum I-beam base
- Weight: Approx. 1.46 lbs
- Country of Origin: USA
What’s Included
- Forster Original Case Trimmer (CT1010)
- 0.490 in diameter cutter shaft
- Standard 5-3/8 in base
Frequently Asked Questions
Does the Forster Original Case Trimmer come with collets and pilots?
No, the Original Case Trimmer requires a collet and pilot for each case you want to trim, and those are sold separately. The collet holds the case body while the pilot supports the neck during trimming. The Original is compatible with Collets #1 through #4, so you order the sizes that match the brass you are loading.
What calibers will the Forster Original Case Trimmer handle?
It trims most standard calibers with bullet diameters from .171 inch to .459 inch, which covers everything from 5.7×28 up through 45-70. Maximum case length on the standard base is 2.94 inches. If you want to trim .17 caliber brass, you will need the dedicated 17 cal cutter shaft in addition to the correct collet and pilot.
Can the Forster Original Case Trimmer do more than just trim case length?
Yes, it works like a versatile mini lathe. Beyond length trimming, it handles hollow pointing, neck turning, inside neck reaming, case mouth deburring, and primer pocket reaming to remove military crimps. The cutter shaft accepts all six case trimmer accessories for different prep jobs.
Can I power the Forster Original Case Trimmer with a drill?
You can. By adding the Forster Power Adapter, you can run the trimmer off a drill or power screwdriver, which speeds things up considerably on larger batches of brass. By hand, the crank handle gives you plenty of control for precision work.





Reviews
There are no reviews yet.