0
0

Forster NTG-224 Neck Tension Gage .22 Caliber Reloading Tool

UPC: 757253991158

$39.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Consistent neck tension is one of the quieter secrets behind tight groups, and the Forster NTG-224 Neck Tension Gage gives .22 caliber handloaders a fast, repeatable way to check it. Instead of fussing with inside micrometers or doing the math on neck wall thickness, you insert the stepped end into a sized case and slide it in until one of the diameters gives a clean slip fit. That reading tells you where your inside neck diameter lands so you can dial in your resizing and seating.

The tool works on the same principle as a shotgun choke gage. It has four stepped diameters that increase in size toward the handle, and each step is etched right into the metal so there is no guessing. On the NTG-224 those steps run .220, .221, .222, and .223 inches, each ground to a tight tolerance. You run the gage in after neck sizing and before bullet seating, then use the resulting number to fine-tune your case prep for the bullet you are loading.

How the NTG-224 Sharpens Your Load Workflow

Sorting a batch of brass is where this gage earns its keep. Reloaders who weigh cases, anneal, and bump shoulders often still find a handful of necks per box that are too loose or too tight, and this tool flags them in seconds. It also lets you peek at the inside of the neck to confirm a donut has not built up at the neck-shoulder junction, which is the kind of thing that quietly wrecks seating depth and tension.

Who Gets the Most Out of the Forster NTG-224

If you are chasing single-digit velocity spread or just want your .22 centerfire loads to behave the same round after round, this is a simple addition to the bench. For best results, get your necks to a uniform diameter first with a mandrel or bushing die, then let the gage confirm you are where you want to be. It is built from solid machined metal and carries Forster's lifetime warranty against defects, so it should outlast plenty of brass.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NTG-224
  • UPC: 757253991158
  • Caliber: .22 Caliber (.224)
  • Function: Inspection Tool
  • Stepped Diameters: .220, .221, .222, .223 in
  • Tolerance: ±0.00015 in
  • Number of Steps: 4
  • Color: Red
  • Pieces: 1
  • Warranty: Lifetime against defects
  • Shipping Weight: 0.095 lb

What’s Included

  • Forster NTG-224 .22 Caliber Neck Tension Gage (1)
  • User instructions

Frequently Asked Questions

How do I use the Forster NTG-224 Neck Tension Gage?

After you neck size your .22 caliber brass and before seating bullets, slide the stepped end of the gage into the case neck until one of the four diameters gives a clean slip fit. Read the etched number at that step to find your inside neck diameter. Use that value to fine-tune your resizing and seating for consistent tension across the batch.

What diameters does the NTG-224 measure?

The NTG-224 has four stepped diameters etched into the metal: .220, .221, .222, and .223 inches. Each step is ground to a tight tolerance of about ±0.00015 inch. The step that slips cleanly into your sized neck tells you where your inside diameter sits.

Do I need to prep my brass before using the gage?

Yes, you'll get the most accurate reading if your necks are already uniform. Many reloaders mandrel size or run a bushing die first so the neck is consistent, then use the NTG-224 to confirm the inside diameter. It also lets you check that a donut hasn't formed at the neck-shoulder junction.

Is the NTG-224 only for .224 bullets?

It's built for the .22 caliber family that uses .224 diameter bullets, which covers cartridges like the .223 Remington, .22-250, and similar. The stepped diameters are sized to check the inside neck of those sized cases. Forster offers separate gages for other calibers if you load more than one bullet diameter.

Additional information

UPC

757253991158

Manufacturer

Manufacturer Part Number

NTG-224

Caliber/Gauge

.22 Caliber

Shipping Weight

0.095

Reviews

There are no reviews yet.

Be the first to review “Forster NTG-224 Neck Tension Gage .22 Caliber Reloading Tool”