0
0

Forster Neck Tension Gage Kit – 5 Piece Multi-Caliber Set

UPC: 757253991073

$204.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those quiet variables that separates good handloads from great ones. If your inside neck diameters are all over the map, your bullet release varies, your velocities spread out, and your groups open up. The Forster Neck Tension Gage Kit gives you a fast, mechanical way to check what's going on inside your case necks so you can sort brass before it ever reaches the seating die.

This kit includes five gages covering .224, .243, .264, .284, and .308. Each gage has four stepped diameters that increase in size up to the handle, and every step is etched right into the metal so you always know exactly what you're reading. You use them after neck sizing and before seating: insert the stepped end into the sized case neck and slide it in until one of the diameters achieves a slip fit. The number where it stops tells you your inside neck diameter, and from there you can fine-tune your case prep for consistent bullet release across the batch.

Where the Forster NTG Fits in Your Reloading Bench

Think of these as inspection tools rather than sizing tools. They don't cut or shape anything, they just tell you what you've got. That makes them a natural pairing with mandrel dies and expander setups, where you're trying to dial in a specific, repeatable interference fit. Run your brass, check it with the gage, and sort out the necks that read differently so your seating step stays uniform.

Why Reloaders Reach for the Neck Tension Gage Kit

The multi-caliber coverage is the big draw here. Instead of buying a single gage for one bore size, you get the five most common precision rifle diameters in one package, which is handy if you're loading for several rifles. The gages also double as a quick way to inspect for a donut forming at the neck-shoulder junction, a common headache with brass that's been fired and sized many times. For anyone chasing tighter groups and more consistent chronograph numbers, this is a simple, no-batteries tool that earns its spot in the loading room.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NTG-KIT
  • UPC: 757253991073
  • Type: Neck Tension Gage / Inspection Tool
  • Pieces: 5-Piece Set
  • Calibers Covered: .224, .243, .264, .284, .308
  • Stepped Diameters: Four per gage, size etched on tool
  • Function: Inspect inside neck diameter / sort brass before seating
  • Caliber/Gauge: Multi
  • Shipping Weight: 1.19 lb

What’s Included

  • .224 (22 caliber) Neck Tension Gage
  • .243 (6mm) Neck Tension Gage
  • .264 (6.5mm) Neck Tension Gage
  • .284 (7mm) Neck Tension Gage
  • .308 (30 caliber) Neck Tension Gage

Frequently Asked Questions

What calibers does the Forster Neck Tension Gage Kit cover?

The five-piece kit includes gages for .224, .243, .264, .284, and .308. That lines up with the most popular precision rifle bore sizes, so it covers a lot of common builds in a single package. Each gage is marked by caliber and reads inside neck diameter.

How do you use the Neck Tension Gage?

After you've neck sized your brass and before seating bullets, insert the stepped end of the gage into the case neck and slide it in until one of the diameters gets a slip fit. The point where it stops tells you the inside neck diameter, with each step etched right on the tool. You use that reading to sort brass and fine-tune your case prep for consistent bullet release.

Does the Forster Neck Tension Gage Kit size or trim the brass?

No, these are inspection tools, not sizing or trimming tools. They measure what you already have so you can screen and sort cases, but they don't cut, expand, or reshape anything. They pair well with mandrel or expander dies that do the actual sizing work.

Can the kit help spot a donut in the case neck?

Yes. Along with reading inside neck diameter, the gages let you inspect the inside of the neck to check whether a donut has formed at the neck-shoulder junction. Catching that buildup is useful for keeping bullet seating and release consistent on brass that's been fired and sized many times.

Additional information

UPC

757253991073

Manufacturer

Manufacturer Part Number

NTG-KIT

Caliber/Gauge

Multi

Shipping Weight

1.19

Reviews

There are no reviews yet.

Be the first to review “Forster Neck Tension Gage Kit – 5 Piece Multi-Caliber Set”