Description
Setting up a 7.62×39 barrel or sizing up a used rifle you just brought home? A GO gage is the first tool that tells you whether the chamber is cut where it should be. This Forster GO gage matches the SAAMI minimum chamber dimension of 1.252", so when your bolt closes cleanly on it, you know the chamber will accept factory ammo built to spec. It's a simple, purpose-built piece of steel that answers a question every builder needs answered before the first round goes downrange.
What the Forster 7.62×39 GO Gage Tells You
Think of the GO gage as the short end of the measuring stick. It represents the minimum allowable chamber length. Drop it in the chamber, close the action, and if it seats without resistance, the chamber is long enough to feed standard ammunition. If the bolt won't close or fights you, the chamber may be cut too tight. Most gunsmiths use the GO alongside a NO-GO gage to bracket their headspace right in the safe zone between the two, which is where you want a fresh barrel to land.
Built Like a Precision Tool Should Be
Forster has been turning out reloading and gunsmithing gear since 1935, and it shows in how these gages are made. Each one is machined from A2 tool steel and precision ground to ANSI and SAAMI tolerances, held to roughly plus or minus .00015". They're inspected with NIST-certified measurement equipment before they leave the shop, so the number stamped on the side is the number you're actually measuring against. That kind of consistency is why builders trust their chamber work to a Forster gage.
A Smart Add to Any 7.62×39 Build
Whether you're fitting a new barrel to an AK-pattern build, a bolt gun, or checking headspace on a surplus rifle before you shoot it, this gage earns its spot on the bench. It's easy to use, it doesn't require tearing anything apart beyond removing the extractor and ejector on some actions, and it gives you a straight answer. Made in the USA and backed by Forster's lifetime warranty against defects in materials and workmanship.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG762X39G
- UPC: 757253990762
- Caliber: 7.62x39mm
- Gage Type: GO Gauge
- SAAMI Dimension: 1.252"
- Material: A2 Tool Steel, hardened
- Tolerance: ±.00015"
- Color: Steel
- Quantity: 1
- Country of Origin: United States
What’s Included
- 1 Forster GO Headspace Gage, 7.62×39 (1.252")
Frequently Asked Questions
What does it mean if my bolt closes on the 7.62×39 GO gage?
If the action closes cleanly on the GO gage, your chamber meets or exceeds the SAAMI minimum dimension of 1.252" and will accept factory ammunition built to spec. That's exactly what you want to see. If the bolt won't close or closes with resistance, the chamber may be cut too tight for reliable feeding.
Do I need a NO-GO gage too, or is the GO gage enough?
The GO gage tells you the chamber is long enough, but it doesn't tell you if it's too long. Most builders pair the GO with a NO-GO gage so they can set headspace right in the safe window between the two. If you're finish-chambering a new barrel, running both is the standard approach.
What is this GO gage made of and how accurate is it?
Forster machines these gages from A2 tool steel and precision grinds them to ANSI and SAAMI tolerances, holding roughly plus or minus .00015". Each one is checked with NIST-certified measuring tools before it ships. That precision is the whole point of using a dedicated gage instead of guessing.
Can I use the Forster 7.62×39 GO gage on an AK-style rifle?
Yes, this gage works for checking headspace on 7.62×39 chambers, including AK-pattern builds and bolt guns. On some actions you'll need to remove the extractor and ejector for an accurate reading. Always confirm the firearm is unloaded and wear eye protection before checking.





Reviews
There are no reviews yet.