Description
If you're running a Forster Hand-Held Outside Neck Turner and loading anything in the 6.5mm family, this is the pilot that matches your brass. It slides inside the case neck to hold everything steady while the carbide cutter shaves the outside of the neck down to a uniform thickness. No pilot, no accurate cut, so think of this as the small part that does a lot of the heavy lifting.
What the .264 Pilot Actually Does
The whole point of turning necks is getting that brass wall to the same thickness all the way around. When one side of the neck is thicker than the other, the thin side lets go of the bullet a hair early at ignition, which nudges the bullet slightly off line with the bore. Even that tiny bit of misalignment shows up on paper. This pilot centers the case on its own axis so the cutter can even things out consistently, case after case.
Why the Fit Matters on This Forster Pilot
Forster grinds these pilots roughly .002 to .0025 inches under the bullet diameter, so the neck rides on the pilot without binding. That slight clearance is what keeps the brass turning smoothly instead of dragging or galling. The .264 size is built specifically for 6.5mm cartridges like the 6.5 Creedmoor, 6.5×55, 260 Remington, and the rest of the .264 crowd. Reloaders who've used the system tend to describe it as simple and easy to work with once the pilot is seated.
Picking the Right Neck Turner Pilot
One thing worth knowing up front: these pilots are made only for the Hand-Held Outside Neck Turner. They are not interchangeable with the pilots for Forster's case trimmer or the trimmer-mounted neck turner accessory, even though the sizes look similar. If you've got the hand-held unit, this is the correct match for .264 bullets. Grab the caliber you shoot, keep it with your turner, and you're set for cleaner, more uniform necks.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HOT2264
- UPC: 757253009495
- Caliber: .264 (6.5mm)
- Pilot Type: For Hand-Held Outside Neck Turner
- Fit: Ground .002 to .0025 inch under bullet diameter
- Compatible Tool: Forster Hand-Held Outside Neck Turner (HOT100)
- Shipping Weight: 0.05 lb
What’s Included
- One Forster Hand-Held Outside Neck Turner Pilot, .264 caliber (HOT2264)
Frequently Asked Questions
Does this pilot work with the Forster case trimmer neck turner too?
No. This pilot is made specifically for the Hand-Held Outside Neck Turner. Forster's case trimmer pilots and the trimmer-mounted outside neck turner pilots are separate parts and are not interchangeable, so make sure you're matching this to the hand-held unit.
What calibers does the .264 pilot cover?
It's sized for .264 diameter bullets, which is the 6.5mm bore. That covers popular cartridges like the 6.5 Creedmoor, 260 Remington, 6.5×55 Swede, 6.5 PRC, and other 6.5mm rounds. If you shoot a 6.5, this is your pilot.
Why is the pilot smaller than my bullet diameter?
Forster grinds these pilots about .002 to .0025 inches under bullet diameter on purpose. That small amount of clearance lets the case neck slide onto the pilot and rotate smoothly without binding while the cutter does its work. A pilot that fit exactly would drag.
Do I need this pilot if I already have the neck turner?
Yes. The pilots are sold separately from the Hand-Held Outside Neck Turner because the tool is caliber-specific at the pilot. You'll need the correct pilot for each bullet diameter you plan to turn, so this .264 pilot is required to turn 6.5mm brass.





Reviews
There are no reviews yet.