0
0

Forster HOT100 Hand Held Outside Neck Turner with Carbide Cutter

UPC: 757253020032

$91.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Turning case necks is one of those prep steps that quietly pays off at the target. When one side of a neck is thicker than the other, that thin wall lets go of the bullet a hair early, nudging it out of line with the bore before it ever gets moving. The Forster HOT100 Hand Held Outside Neck Turner trims that inconsistency away, giving every case in your batch the same wall thickness so each bullet starts its trip the same way.

What Sets the HOT100 Neck Turner Apart

The heart of this tool is a precision ground carbide cutter, which Forster calls the only one of its kind in the industry. Carbide holds an edge far longer than standard steel, so you're not stopping to resharpen between batches. The cutter is ground with special angles and reliefs made specifically for neck work, and the approach angle lets you turn right up to the case shoulder without biting in where you don't want it.

Dialing In Your Cuts

The micrometer adjustment knob is where the precision really shows. You can fine tune material removal to .0005" in either direction, and index marks in .001" increments are stamped right on the tool body so you can repeat a setting without guesswork. The aluminum case holder clamps your brass firmly with a turn of the knob and handles cases up to .592" at the base. Step up to larger stuff and the optional large case holder covers rims from .593" to .812".

Pairing It With the Right Pilot

This is a hand held, bench-top style turner that works across a huge range of calibers once you add the matching pilot. Forster offers pilots in 29 caliber options, all the way up to .50 BMG. Pilots are sold separately and run about .002" to .0025" under bullet diameter for a snug fit inside the neck. Users consistently report it's quick to set up and easy to run through a pile of brass, which makes it a smart addition for anyone chasing cartridge-to-cartridge consistency on a precision rifle load.

Key Specifications

  • Manufacturer: Forster Products
  • Model: HOT100
  • Manufacturer Part Number: HOT100
  • UPC: 757253020032
  • Type: Hand Held Outside Neck Turner
  • Cutter: Precision ground carbide, no sharpening required
  • Adjustment: Micrometer knob, .0005" increments either direction
  • Index Marks: .001" increments stamped on tool body
  • Case Holder Capacity: Up to .592" base diameter
  • Large Case Holder Range: .593" to .812" (sold separately)
  • Pilots: Sold separately, 29 caliber options up to .50 BMG
  • Country of Origin: Made in USA
  • Shipping Weight: 0.55 lbs

What’s Included

  • Forster Hand Held Outside Neck Turner (HOT100)
  • Standard case holder (fits cases up to .592" base diameter)
  • Carbide neck thickness cutter

Frequently Asked Questions

Does the HOT100 neck turner come with pilots?

No, pilots are sold separately and chosen to match your case mouth diameter. Forster offers pilots in 29 caliber options, up to and including .50 BMG. Each pilot runs roughly .002" to .0025" smaller than bullet diameter for a proper fit inside the neck.

What size cases does the included case holder fit?

The standard case holder that ships with the HOT100 handles cases up to .592" in diameter at the base. If you're turning larger brass, the large case holder covers rims from .593" to .812" and is sold separately.

How fine can I adjust the cut on the Forster neck turner?

The micrometer adjustment knob lets you move the carbide cutter in .0005" steps in either direction. Index marks in .001" increments are stamped right on the tool body, so dialing in and repeating a setting is straightforward.

Is the carbide cutter replaceable?

Yes. The carbide cutter is precision ground and holds its edge for a long time with no sharpening needed. When it does eventually wear, Forster sells a replacement carbide cutter (part HOT100-012) so you don't have to replace the whole tool.

Additional information

UPC

757253020032

Manufacturer

Manufacturer Part Number

HOT100

Shipping Weight

0.55

Reviews

There are no reviews yet.

Be the first to review “Forster HOT100 Hand Held Outside Neck Turner with Carbide Cutter”