Description
The Forster Full Length Bushing Ultra Die Set gives .300 PRC handloaders the kind of control that shows up on the target. This two-die set pairs a Bushing Full Length Sizing Die with Forster's Bench Rest Ultra Micrometer Seater Die, and it ships with three interchangeable neck bushings sized .332, .334, and .336. That combination lets you size the body, bump the shoulder, and manage neck tension all in one setup, which is exactly what you want when you're chasing consistency with a magnum like the 300 PRC.
What the Bushing Sizing Die Brings to the Bench
The real advantage of the bushing design is that neck sizing is handled separately from body and shoulder work. By swapping bushings in .001-inch steps, you can size the neck down only as much as your brass and bullet pull require, which cuts down on overworking the brass. The result is longer case life and better concentricity, since the body and shoulder get sized just enough to chamber cleanly in a minimum-spec SAAMI chamber while the bushing keeps the neck honest. The die also deprimes and runs Forster's elevated expander for cleaner case-and-neck alignment on the way out.
Fine-Tuning with the Ultra Micrometer Seater
The Ultra Micrometer Seater is a non-crimping seater that captures the case in a sliding chamber sleeve before the bullet ever starts moving, so bullet and case stay in alignment during seating. The micrometer head adjusts seating depth in .001-inch increments, and you can fine-tune down to about .0005 inch in either direction. High-contrast white markings make it easy to read and record your settings, so switching between bullets is as simple as dialing back to a number you already wrote down.
Built the Way Forster Builds Everything
Every die carries Forster's Cross Bolt Die Lock Ring, which clamps the split ring closed instead of driving a set screw into the die threads. That keeps your settings locked and your alignment true load after load. These dies are machined and hand-polished to tight tolerances, and the whole set comes packed in Forster's Deluxe Die Box. Keep in mind a shell holder is not included, so grab the correct one for your press if you aren't running a Forster Co-Ax.
Key Specifications
- Caliber: 300 PRC
- Die Type: Bushing Full Length Die Set
- Dies Included: Bushing Full Length Sizing Die and Bench Rest Ultra Micrometer Seater Die
- Bushings Included: 3 (.332, .334, .336)
- Bushing Increments: 0.001 inch
- Seater Adjustment: Micrometer, down to .0005 inch, either direction
- Seater Style: Non-crimping
- Lock Ring: Forster Cross Bolt Die Lock Ring
- Thread: 7/8-14
- Material: Case Hardened Steel
- Manufacturer: Forster Products
- Manufacturer Part Number: UFB4749
- UPC: 757253989902
- Shipping Weight: 1.6 lbs
- Country of Origin: USA
What’s Included
- Bushing Full Length Sizing Die
- Bench Rest Ultra Micrometer Seater Die
- 3 neck bushings (.332, .334, .336)
- Cross Bolt Die Lock Rings
- Instructions
- Deluxe Die Box
Frequently Asked Questions
What bushings come with the Forster 300 PRC Ultra Die Set?
The set ships with three interchangeable neck bushings in sizes .332, .334, and .336. Those cover the common neck tension range for most .300 PRC brass and bullet combinations. If your brass neck wall thickness calls for something outside that range, Forster offers additional bushings in .001-inch increments separately.
Does this set include a shell holder?
No, a shell holder is not included with the die set. If you're running a non-Forster press, pick up the shell holder recommended by your press maker for the .300 PRC case head. Forster Co-Ax presses don't require a shell holder, so you're covered if you're loading on one of those.
How precise is the micrometer seater on this Forster set?
The Ultra Micrometer Seater lets you adjust seating depth in .001-inch increments and fine-tune down to roughly .0005 inch in either direction. The high-contrast white markings make it easy to read and write down your settings. That means switching between bullets is just a matter of dialing back to a number you already recorded.
Why run a bushing die instead of a standard full length die for 300 PRC?
A bushing die lets you control neck sizing independently from body and shoulder sizing. You size the neck only as much as you need, which reduces overworking the brass and helps with case life and concentricity. For precision .300 PRC loads, that extra control over neck tension is a big part of building consistent ammo.




Reviews
There are no reviews yet.