0
0

Forster 6mm BR Bushing Full Length Sizing Die Kit with 3 Bushings

UPC: 757253989957

$131.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster 6mm BR Bushing Full Length Sizing Die Kit is built for loaders who treat brass prep as part of the accuracy equation. It sizes the case body and bumps the shoulder just enough to fit a minimum SAAMI chamber, while the interchangeable neck bushings let you set neck tension exactly where you want it. The result is brass that chambers smoothly, holds the bullet consistently, and lasts through more firings before it gives out.

What the 6mm BR Bushing Die Brings to the Bench

Unlike a standard sizing die that leans on an expander ball to set neck diameter, this die uses a bushing to size the neck from the outside. That means you only work the brass as much as the job requires. Pick a bushing roughly .002 inch under your loaded neck diameter for typical bolt-gun tension, or drop to .003 under if you want a firmer grip. The kit ships with three bushings in .264, .266, and .268, which covers the most common setups for 6mm BR right out of the box, and over ninety sizes are available if you want to fine-tune further.

Dialing In Your 6mm BR Sizing Die

Every one of these dies carries an etched reference line and Forster's Accu-Ring lock ring, both marked for .001 inch adjustments. That makes it easy to set your shoulder bump precisely and return to the exact same setting every session, which is a big deal when you are chasing repeatable headspace and tight groups. The bushing height inside the die is adjustable too, so you can size the full neck or leave a portion untouched depending on your preference.

Built the Forster Way

The die body is machined to tight tolerances with a hand-polished interior that keeps friction and case drag down during the sizing stroke. It threads into any standard 7/8-14 press, and if you are running a Forster Co-Ax you can skip the shellholder entirely. For 6mm BR shooters loading for benchrest, varmint rigs, or match guns, this is the kind of die that earns its spot on the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: FBK4279
  • UPC: 757253989957
  • Caliber: 6mm BR
  • Die Type: Bushing Full Length Sizing Die
  • Function: Sizes neck, body, and shoulder; deprimes
  • Bushings Included: Three (.264, .266, .268)
  • Bushing Increments: .001 inch
  • Lock Ring: Accu-Ring with etched reference line
  • Thread: 7/8-14 standard press compatible
  • Material: Hand-polished steel
  • Shipping Weight: 0.5 lb

What’s Included

  • Forster 6mm BR Bushing Full Length Sizing Die
  • Three neck bushings (.264, .266, .268)
  • Accu-Ring die lock ring with etched reference line
  • Decapping/expander assembly
  • User instructions

Frequently Asked Questions

Does the 6mm BR bushing die kit come with bushings included?

Yes. This kit ships with three neck bushings sized .264, .266, and .268, which Forster selected as the most commonly needed options for 6mm BR. If you want a different neck tension down the road, individual bushings are available in .001 inch increments, with over ninety sizes to choose from.

How do I pick the right bushing size?

Measure the outside neck diameter of a loaded round and subtract .002 inch for standard bolt-gun neck tension. If you want a firmer bullet grip, subtract .003 inch instead. You can also calculate it from your brass by taking neck wall thickness times two, adding bullet diameter, then subtracting .002 inch.

What is the difference between this full length bushing die and a bump neck die?

This full length bushing die sizes the case neck, body, and shoulder all in one stroke, which keeps brass fitting a minimum SAAMI chamber while controlling neck tension. A bump neck die only sizes the neck and sets shoulder headspace without touching the body. Most reloaders start with the full length bushing die because it offers the most flexibility.

Will this die work in a standard reloading press?

Yes. It uses standard 7/8-14 threads and works in any common single-stage or turret press. If you run a Forster Co-Ax press you can skip the shellholder, since the Co-Ax handles the case head without one.

Additional information

UPC

757253989957

Manufacturer

Manufacturer Part Number

FBK4279

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Forster 6mm BR Bushing Full Length Sizing Die Kit with 3 Bushings”

Related Products