0
0

Forster Bushing Bump Neck Die Kit 6.5 PRC with 3 Bushings

UPC: 757253991332

$103.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bushing Bump Neck Sizing Die Kit for 6.5 PRC is built for handloaders who care about neck tension and brass life. Instead of squeezing the neck all the way down and then springing it back open with an expander, the bushing lets you size the neck only as much as you need. The result is straighter necks, more consistent bullet grip, and brass that doesn't get worked to death over repeated firings.

What the 6.5 PRC Bushing Bump Neck Die Does

This is a one-step operation. As the case goes up into the die, the bushing sizes the neck down to the diameter you've chosen, and at the same time the die bumps the shoulder back to give you proper headspace for smooth chambering. A decapping assembly handles depriming on the same stroke. Because the body of the case keeps its fire-formed fit to your chamber and the shoulder gets a controlled bump, you hold onto concentricity round after round. That's the whole point of a bump die: minimal working of the brass, maximum consistency.

Three Pre-Selected Bushings in the Kit

Forster's crew picks three standard bushings to cover the common 6.5 PRC neck wall thicknesses, measuring .292", .290", and .288". Each one steps in .002" so you can fine-tune how much neck tension you're running. Every bushing is machined to a slick interior finish for smooth, drag-free sizing. If you want to split the difference or go tighter, Forster offers interchangeable bushings in .001" increments, so you're never locked into just these three.

Flexible Setup for Turned or Unturned Brass

You've got options on how you run it. If your brass is neck-turned to a uniform wall thickness, pull the expander ball and let the bushing do all the work from the outside. Running factory or unturned brass? Leave the expander in and pick a bushing that sizes a touch larger, so every case ends up with the same inside diameter and even bullet grip. The die is hand-polished and made in the U.S.A., which is a big part of why Forster gear has the reputation it does among precision reloaders.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: BBK2409
  • UPC: 757253991332
  • Caliber: 6.5 PRC
  • Die Type: Bushing Bump Neck Sizing Die Kit
  • Bushings Included: 3 (.292", .290", .288")
  • Bushing Increments Available: .001"
  • Decapping: Decapping assembly included
  • Expander Ball: Removable
  • Finish: Hand-polished, superior machined interior
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 0.6 lb

What’s Included

  • One hand-polished Forster Bushing Bump Neck Sizing Die for 6.5 PRC
  • Three pre-selected neck bushings (.292", .290", .288")
  • Decapping assembly
  • Instructions

Frequently Asked Questions

What bushings come with the Forster 6.5 PRC bushing bump neck die kit?

The kit ships with three standard bushings pre-selected by Forster, measuring .292", .290", and .288". That spread covers the common neck wall thicknesses you'll run into with 6.5 PRC brass. If you need something in between or tighter, Forster makes interchangeable bushings in .001" steps that you can buy separately.

Does this die deprime the case while it sizes?

Yes. The die includes a decapping assembly, so depriming happens in the same stroke as the neck sizing and shoulder bump. It's a one-step operation that keeps your workflow quick.

Do I need to run the expander ball with this neck die?

That depends on your brass. If your necks are turned to a uniform wall thickness, you can remove the expander ball and let the bushing size the neck entirely from the outside. With unturned or factory brass, leaving the expander in helps give every case a consistent inside diameter and even bullet grip.

Why run a bushing bump die instead of a standard full-length die?

A bushing bump neck die sizes the neck down only as much as you choose while still bumping the shoulder for proper headspace. That means less working of the brass, straighter necks, and better concentricity, which adds up to longer case life and more consistent ammo. It's a favorite setup for precision shooting where neck tension control matters.

Additional information

UPC

757253991332

Manufacturer

Manufacturer Part Number

BBK2409

Shipping Weight

0.6

Reviews

There are no reviews yet.

Be the first to review “Forster Bushing Bump Neck Die Kit 6.5 PRC with 3 Bushings”

Related Products