Description
If you've been chasing tight groups out of your .308 bolt gun or AR, the thing that separates good handloads from great ones is seating depth consistency. The Forster Ultra Micrometer Seater Die takes the guesswork out of that step. It carries over the straight-line seating design of Forster's original Bench Rest Seater Die and adds a precision micrometer top so you can set your seating depth and come right back to it later without the usual trial-and-error dance.
How the Forster Ultra Micrometer Die Keeps Everything Straight
The heart of this die is a floating chamber sleeve that fully captures the case before the bullet is press-fit into the neck. That sleeve holds the bullet and case in alignment through the whole seating stroke, which cuts down on runout and gives you rounds that chamber clean and shoot concentric. The seating stem has also been refined to fit a wide range of bullet shapes, including ballistic tips and most VLD (Very Low Drag) profiles, so you're not fighting with mangled meplats on your match bullets.
Dialing In Depth With the Micrometer Head
The micrometer adjusts in either direction and is readable down to .0005", with gradations clearly marked at .001" increments. The bright white markings are easy to read on the bench, even under less-than-ideal shop lighting or for folks who wear glasses. Once you find the seating depth your rifle likes, you jot down the number and return to it exactly, whether that's next week or next season.
Built for the .308 Reloader
This is a non-crimping seater die chambered specifically for .308 Winchester and 7.62 NATO, machined from quality steel the way Forster builds everything. It threads into standard 7/8-14 presses, and if you happen to run it in a Forster Co-Ax press you won't even need a shellholder. For anyone loading precision .308 for benchrest, long range, or just squeezing the best accuracy out of a hunting rifle, this is one of the most trusted seating dies on the market.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: U00107
- UPC: 757253006647
- Model: Bench Rest Ultra Micrometer Seater
- Caliber: .308 Winchester / 7.62 NATO
- Die Type: Bullet Seating Die (non-crimping)
- Micrometer Adjustment: Adjustable to .0005"
- Graduation Marks: .001" increments
- Material: Steel construction
- Thread: 7/8-14 (fits most standard presses)
- Shipping Weight: 0.8 lbs
What’s Included
- Forster Ultra Micrometer Seater Die (.308 Win / 7.62 NATO)
Frequently Asked Questions
What makes the Forster Ultra Micrometer Seater Die different from a standard seating die?
The big upgrades are the micrometer top and the floating chamber sleeve. The micrometer lets you set and record exact seating depth down to .0005" so you can reproduce it anytime, while the sleeve fully captures the case to keep the bullet and brass aligned during seating. The result is far less runout and a lot less trial-and-error compared to a basic die.
Will this die work with ballistic tip and VLD bullets?
Yes. Forster refined the seating stem on this die to fit a wider range of bullet profiles, including ballistic tipped and most VLD (Very Low Drag) bullets. That helps avoid damaging the delicate tips on match and long-range projectiles.
Is the Forster Ultra Micrometer Seater Die a crimping die?
No, this is a non-crimping seater die. It press-fits the bullet to your set depth without applying a crimp, which is what most precision reloaders want. If you need a crimp, you'd add a separate crimping step with another die.
Does this die fit standard reloading presses?
It uses the standard 7/8-14 thread, so it threads into virtually any common single-stage or turret press. If you're running a Forster Co-Ax press, you won't need a shellholder since those presses don't use one.





Reviews
There are no reviews yet.