Description
If you're loading 6.5 PRC and want ammo that drops into the same hole shot after shot, the Forster Bench Rest Seater Die earns its place on the bench. Forster was the first company to build a die like this, and the design has held up as one of the best straight-line seaters you can buy. The whole idea is simple but effective: a sliding die chamber holds the case, bullet, and seating stem in perfect alignment while the bullet is pressed home, so you get concentric rounds with minimal runout.
How the 6.5 PRC Seater Die Keeps Things Straight
The heart of this die is a sliding chamber with a concentric bullet channel cut just slightly larger than bullet diameter. That tight fit is what gives you true co-axial seating, since the chamber supports the entire outside of the sized case rather than just the neck and bullet. Forster machines the close-fitting chamber with one-piece reamers to keep concentricity dialed in, and the whole die is made from quality steel held to tight tolerances.
A Non-Crimping Design Built Around the Bullet
This is a non-crimping seater, which means it focuses purely on seating depth and alignment without putting a crimp on the case mouth. The bullet seating stem is hand polished for smooth, repeatable contact, and Forster has refined their stems over the years to play nicely with modern hybrid, ballistic tip, and VLD-style bullets. If you've got a mix of long-range projectiles in your 6.5 PRC loads, the stem shape won't mar the tips.
Fits Your Existing Setup
One of the nice things about the Forster Bench Rest Seater Die is that it threads into most standard reloading presses, so you don't need a specialized setup to run it. Each die also carries Forster's Cross Bolt Lock Ring, which clamps the split ring closed instead of digging a set screw into the die threads, keeping your settings put without chewing up the finish. For reloaders who care about consistency, this is a straightforward upgrade that pays off downrange.
Key Specifications
- Caliber: 6.5 PRC
- Die Type: Bench Rest Seater Die (non-crimping)
- Seating Style: Straight-line / co-axial
- Seating Stem: Hand-polished
- Lock Ring: Forster Cross Bolt Lock Ring
- Press Compatibility: Adapts to most standard reloading presses
- Number of Dies: 1
- Manufacturer: Forster Products
- Manufacturer Part Number: 006016
- UPC: 757253991370
- Shipping Weight: 0.72 lbs
What’s Included
- Forster Bench Rest Seater Die for 6.5 PRC (1 die)
- Cross Bolt Lock Ring (installed)
Frequently Asked Questions
Does the Forster Bench Rest Seater Die for 6.5 PRC crimp the case?
No, this is a non-crimping seater die. It's designed strictly to seat the bullet to a consistent depth while keeping the case and bullet in alignment. If you want to crimp your 6.5 PRC loads, you'll need a separate crimp die.
Will this seater die work in my press, or do I need a Forster Co-Ax?
It adapts to most standard reloading presses, so you don't need a Forster press to use it. Keep in mind that if you run it in a Forster Co-Ax press you won't need a shellholder, but in a conventional press you'll use the shellholder recommended by your press maker.
Does this die have a micrometer for adjusting seating depth?
No, the standard Bench Rest Seater Die uses a threaded seating stem rather than a micrometer top. If you want micrometer adjustment with gradation marks for fine-tuning depth, Forster offers the Ultra Micrometer version of this seater as a separate model.
Will the seating stem handle long-range VLD and ballistic tip bullets in 6.5 PRC?
Yes. Forster has refined their seating stems over the years to better fit modern hybrid, ballistic tip, and VLD bullets, so the stem makes contact in the right place without damaging the tip. That makes it a solid match for the long, high-BC bullets most 6.5 PRC handloaders run.


Reviews
There are no reviews yet.