Description
If you handload .300 PRC and runout keeps you up at night, this is the die that fixes it. The Forster Bench Rest Seater Die uses a sliding die chamber built specifically for the .300 PRC case, with a concentric bullet channel cut just a hair larger than bullet diameter. That tight fit is the whole point here. It fully captures the case and lines up the bullet before any pressure is applied, which is how you get genuinely straight, co-axial seating instead of the slight tilt you can pick up from a standard seater.
What Sets the Forster .300 PRC Seater Apart
Forster was the first to bring a die like this to market, going back to the original Bonanza patent on the close-fitting chamber that holds the case, bullet, and seating stem in alignment all at once. The chamber supports the entire outside diameter of the sized case rather than just the neck, so there's far less chance for the bullet to go in crooked. The bullet seating stem is hand polished and has been refined over the years to seat modern ballistic tip and VLD-style projectiles cleanly, which matters a lot when you're loading long, high-BC bullets for a cartridge like the .300 PRC.
Fit and Everyday Use of the Bench Rest Seater Die
This one threads into most standard single-stage and turret presses, and it drops right into a Forster Co-Ax press without a shellholder. Knurled adjustment knobs make dialing in your seating depth simple, and the whole thing is made in the USA. Worth knowing up front: this is the non-crimping bench rest model, so it seats bullets without applying a crimp. If your load calls for a crimp, you'd run a separate roll or taper crimp die after seating. For precision and long-range shooters chasing tight groups, that non-crimp design is usually exactly what you want, since it keeps the focus on alignment and consistency where it counts.
Key Specifications
- Cartridge: .300 PRC
- Die Type: Bench Rest Seater Die (Straight-Line)
- Seating Style: Non-Crimping
- Adjustment: Knurled knob, adjustable bullet stem
- Manufacturer: Forster Products
- Manufacturer Part Number: 006207
- UPC: 757253991189
- Press Compatibility: Most standard single-stage and turret presses; Forster Co-Ax ready
- Country of Origin: USA
- Shipping Weight: 0.755 lb
What’s Included
- One Forster Bench Rest Seater Die
- One hand-polished seating stem
- Die body split lock ring
- Instructions
- Die storage box
Frequently Asked Questions
Does the Forster Bench Rest Seater Die .300 PRC crimp the bullet?
No, this is the non-crimping bench rest model. It seats the bullet without applying any crimp, which is what most precision reloaders prefer. If your load needs a crimp, you can add a separate roll or taper crimp die to your process.
Will this die work in a standard press or do I need a Forster Co-Ax?
It threads into most standard single-stage and turret presses using the included lock ring. It also drops into a Forster Co-Ax press, where you don't need a shellholder. You'll want a .300 PRC shellholder for standard presses, sold separately.
How does the sliding chamber improve accuracy?
The sliding die chamber captures the entire outside diameter of the sized case and lines up the bullet before any seating pressure is applied. That full support keeps the bullet going in straight, which reduces runout. Lower runout generally translates to better concentricity and tighter groups downrange.
Is this the same as the Forster micrometer seater die for .300 PRC?
No. This is the standard Bench Rest Seater Die with a knurled adjustment knob, part number 006207. Forster also makes a separate Micrometer version with a graduated top for recording and returning to exact seating depths, but that is a different product.




Reviews
There are no reviews yet.