0
0

Forster Bench Rest Full Length Die Set .308 Win 2-Die Set

UPC: 757253000508

$115.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster has been making straight-line seating dies longer than most of us have been reloading, and this two-die set for .308 Winchester is a great example of why their stuff earns such a loyal following. The set pairs a Full Length Sizing Die with a standard Bench Rest Seater Die, both machined from case-hardened steel and hand polished before and after heat treating. That extra attention to the inside of the die is what gives you smooth, consistent sizing stroke after stroke.

What the Forster Full Length Sizer Does

The sizing die works the whole case. It brings the neck, shoulder, and body back down so your brass drops cleanly into a minimum SAAMI chamber, deprimes the case, and expands the neck on the way out. The real trick is Forster's E-Z case neck expander system, which uses an elevated expander button positioned just below the die neck. Running it high gives you better mechanical leverage on the expansion stroke and keeps the neck pulling straight instead of getting tugged off center, so you end up with brass that stays concentric and necks that live longer.

Why the Bench Rest Seater Earns Its Name

Forster was the first company to build a straight-line bench rest seater, and the design still holds up. Inside the die, a close-fitting sliding sleeve captures the bullet, case, and seating stem all at once and keeps them perfectly in line before the bullet ever gets pressed home. It's a non-crimping seater, which means the bullet goes in dead straight with minimal runout. Set your depth once and it holds, which is exactly what you want when you're chasing consistency.

Built Around Forster's Cross Bolt Lock Ring

Every die in the set uses the Forster Cross Bolt Die Locking Ring. Instead of driving a set screw straight into the threads and marring your die body, it pinches a split ring closed around the whole thing. Your settings stay put and your dies stay clean. The set is aimed at bolt-action and single-shot .308 rifles where that kind of precision pays off, and it ships in Forster's Deluxe Die Box to keep everything organized on the bench.

Key Specifications

  • Caliber: .308 Winchester / 7.62 NATO
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004501
  • UPC: 757253000508
  • Number of Dies: 2
  • Die Types: Full Length Sizing Die and Bench Rest Seater Die
  • Material: Case-hardened steel, hand polished
  • Seater Style: Non-crimping straight-line bench rest
  • Expander System: E-Z case neck expander with elevated button
  • Lock Ring: Forster Cross Bolt Die Locking Ring
  • Recommended For: Bolt-action and single-shot rifles
  • Shipping Weight: 1.3 lbs

What’s Included

  • Forster Bench Rest Full Length Sizing Die with decapping and expander unit
  • Forster Bench Rest Seater Die
  • Deluxe Die Box

Frequently Asked Questions

Is a shellholder included with the Forster Bench Rest die set?

No, a shellholder is not included in the box, so you'll want to grab the correct one for your press separately. The exception is if you run a Forster Co-Ax press, which doesn't use a shellholder at all. For standard presses, any .308 Winchester size shellholder will do the job.

Does this Forster die set use a micrometer seater?

This is the standard Bench Rest Seater, which uses a manually adjustable seating stem rather than a micrometer top. It still gives you the straight-line sleeve alignment Forster is known for, so runout stays low. If you want a dialable micrometer adjustment, Forster offers that in their Ultra seater sets.

What's the benefit of the elevated expander button on the sizing die?

The E-Z expander button sits high in the die, just below the neck, which gives you more leverage during the expansion stroke. That makes sizing feel easier and keeps the neck pulling straight instead of getting dragged off center. The result is more concentric brass and necks that tend to last longer over repeated loadings.

Will this die set work in any .308 reloading press?

Yes, these are standard 7/8-14 threaded dies that fit any common single-stage or turret press, including Forster's own Co-Ax. They're geared toward bolt-action and single-shot .308 Winchester rifles where precision matters most. Just add the right shellholder for your press and you're set.

Additional information

UPC

757253000508

Manufacturer

Manufacturer Part Number

004501

Shipping Weight

1.3

Reviews

There are no reviews yet.

Be the first to review “Forster Bench Rest Full Length Die Set .308 Win 2-Die Set”