0
0

Forster Bench Rest Die Set 6.8 Western – 2 Die Full Length & Seater

UPC: 757253990359

$115.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bench Rest Die Set for 6.8 Western pairs the two tools you lean on most at the bench: a full length sizing die and the famous Bench Rest seater. Both are machined by hand with one-piece reamers to hold tight tolerances, and the whole package shows up in Forster's Deluxe Die Box with blow-molded, double-wall construction so nothing gets knocked around in shipping or on a crowded reloading bench.

What the Forster 6.8 Western Sizing Die Does

The full length die sizes the case neck, shoulder, and body in one pass, deprimes, and expands the neck as the case comes back out. It brings brass back to SAAMI minimum dimensions so a round chambers cleanly in any 6.8 Western rifle, not just the one it was fired in. The elevated E-Z Out expander ball pulls through the neck high and smooth, which helps keep runout down and takes a lot of the drag out of the stroke.

Where the Bench Rest Seater Earns Its Name

This is the part that put Forster on the map. A caliber-specific sliding chamber holds the bullet, case, and seating stem in alignment through the entire stroke, supporting the full outside diameter of the sized case instead of grabbing it only at the neck or rim. The bullet channel is only slightly larger than bullet diameter, so the projectile starts in square and seats straight. It's a non-crimping design, which is exactly what you want for accuracy work with the 6.8 Western's long, high-BC bullets.

Fit and Setup for the 6.8 Western Dies

Both dies use standard 7/8-14 threads and adapt to most single-stage and turret presses. Each one wears Forster's Cross Bolt lock ring, which clamps around the die body instead of pinching a screw into the threads, so adjustments stay put and the threads stay undamaged. You'll want a shell holder sized for the 6.8 Western case head and a crimp die if your load calls for one, since neither is part of this set.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: 6.8 Western
  • Set Type: 2-Die Bench Rest Set (Full Length Sizer + Bench Rest Seater)
  • Seater Style: Non-crimping sliding chamber
  • Expander: Elevated E-Z Out expander ball
  • Lock Ring: Forster Cross Bolt Die Lock Ring
  • Thread Size: 7/8-14
  • Machining: Hand-machined with one-piece reamers
  • Packaging: Deluxe Die Box (double-wall blow-molded)
  • Manufacturer Part Number: 004625
  • UPC: 757253990359
  • Shipping Weight: 1.45 lb

What’s Included

  • Full Length Sizing Die (6.8 Western)
  • Bench Rest Seater Die (6.8 Western)
  • Forster Deluxe Die Box
  • Instructions

Frequently Asked Questions

What dies come in the Forster Bench Rest Die Set for 6.8 Western?

You get two dies: a full length sizing die and a standard Bench Rest seater die. Both are chambered specifically for the 6.8 Western and packaged together in Forster's Deluxe Die Box. That covers the two steps that matter most for accuracy, sizing brass and seating bullets.

Does the Forster Bench Rest seater die crimp the case?

No, the Bench Rest seater is a non-crimping design. It uses a sliding chamber that holds the bullet and case in alignment for straight-line seating, which is what you want for precision loads. If your load needs a crimp, you'll add a separate crimp die.

Will these dies fit my reloading press?

Yes. Both dies use the standard 7/8-14 thread and adapt to most single-stage and turret presses on the market. The Cross Bolt lock rings make it easy to keep your settings locked in once you've dialed them.

Do I need anything else to start loading 6.8 Western with this set?

You'll need a shell holder sized for the 6.8 Western case head, since one isn't included in the set. If your load calls for a crimp, you'll also want a separate crimp die. Everything else for sizing and seating is right here in the box.

Additional information

UPC

757253990359

Manufacturer

Manufacturer Part Number

004625

Shipping Weight

1.45

Reviews

There are no reviews yet.

Be the first to review “Forster Bench Rest Die Set 6.8 Western – 2 Die Full Length & Seater”