0
0

Forster 7mm PRC Bench Rest Seater Die | Straight-Line Bullet Seating

UPC: 757253990502

$70.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster 7mm PRC Bench Rest Seater Die is the die accuracy-minded handloaders reach for when runout matters. Instead of grabbing the bullet and case neck alone, this one works as an in-line seater that supports the entire outside diameter of the sized case while it seats. A spring-loaded sliding chamber sleeve captures the case first and holds everything in alignment before the bullet ever starts into the neck, which is exactly how you get those straight, concentric rounds that print tight groups.

How the 7mm PRC Bench Rest Seater Die Keeps Things Straight

The heart of this die is a caliber-specific sliding chamber with a concentric bullet channel machined just slightly larger than bullet diameter. That tight fit squares the bullet to the case for true co-axial seating. Forster cuts these chambers with one-piece reamers to hold concentricity between all the machined diameters, and the hand-polished seating stem delivers consistent contact load after load. It's a non-crimping design on purpose, since a crimp and a perfectly straight bullet are working against each other.

Real-World Performance of the Forster 7 PRC Seater

Folks who run these dies regularly report runout right around a thousandth of an inch or less, often matching far pricier competition dies. The die holds its setting once you've dialed it in, so you're not re-adjusting every session. Forster has also refined the seating stems over the years to better fit modern hybrid and ballistic-tip bullets, which is good news for anyone loading the long, high-BC projectiles the 7mm PRC was built around.

Fitting the 7mm PRC Bench Rest Seater Die to Your Press

This die uses standard 7/8-14 threads and adapts to most common reloading presses. It ships with Forster's Cross Bolt lock ring, which clamps the split ring shut rather than driving a set screw into the die threads, so your setting stays put without marring the body. If you're running it in a Forster Co-Ax press, you won't need a shellholder at all. In any other press, just use the shellholder your press maker recommends.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: 7mm PRC
  • Die Type: Bench Rest Seater Die (non-crimping)
  • Seating Style: In-line, sliding chamber sleeve
  • Thread Size: 7/8-14
  • Lock Ring: Cross Bolt split lock ring
  • Manufacturer Part Number: 006110
  • UPC: 757253990502
  • Country of Origin: Made in the U.S.A.
  • Shipping Weight: 0.755 lbs

What’s Included

  • One Forster Bench Rest Seater Die
  • One hand-polished seating stem
  • Cross Bolt split lock ring
  • Complete instructions
  • Die box

Frequently Asked Questions

Does the Forster 7mm PRC Bench Rest Seater Die crimp the case?

No, this is a non-crimping seater by design. Forster builds it that way because crimping and seating a perfectly straight bullet work against each other. If you want to crimp your 7mm PRC loads, you'd add a separate crimp die to your process.

Will this die fit my press, and do I need a shellholder?

It uses standard 7/8-14 threads and adapts to most common reloading presses on the market. If you run it in a Forster Co-Ax press, no shellholder is needed since that press uses jaws instead. In any other press, use the shellholder recommended by your press manufacturer, which is sold separately.

What kind of runout can I expect from this seater die?

Handloaders who use these Bench Rest seaters regularly report runout right around one thousandth of an inch or less, often rivaling much more expensive competition dies. The sliding chamber sleeve captures the whole case and keeps the bullet aligned before it enters the neck, which is what produces that concentricity. Your actual results will depend on your brass prep and press, but the mechanism itself is sound.

Does this die have a micrometer adjustment?

No, this is the standard Bench Rest Seater Die with an adjustable seating stem rather than a micrometer top. Once you set your seating depth and tighten the lock ring, it holds that setting reliably. If you want a built-in micrometer for quick, repeatable depth changes in thousandths, Forster offers the Ultra Micrometer version separately.

Additional information

UPC

757253990502

Manufacturer

Manufacturer Part Number

006110

Shipping Weight

0.755

Reviews

There are no reviews yet.

Be the first to review “Forster 7mm PRC Bench Rest Seater Die | Straight-Line Bullet Seating”