Description
Precision reloaders who shoot the 7mm PRC know that controlling neck tension is where consistency really comes from, and this Forster bushing full length die kit was built for exactly that. It sizes the case neck, body, and bumps the shoulder back to set correct headspace, all in one pass. The included bushings let you decide how much grip you put on the bullet instead of being stuck with whatever a standard die hands you.
What the Forster 7mm PRC Bushing Die Kit Does Differently
Instead of over-working the brass, the bushing sizes the neck just enough to hold the new bullet securely. That means less work hardening and more firings before a case gives out. The die sizes the shoulder and body down just enough to fit a minimum-spec SAAMI chamber, so your reloads chamber snug and reliable without being sloppy. Forster machines these dies by hand from quality steel, and the neck bushings have a smooth interior finish that makes sizing feel effortless.
Three Bushings and an Accu-Ring in the 7mm PRC Kit
This is the kit version, so it arrives with three bushings sized .308, .310, and .312, picked by Forster as the sizes most 7mm PRC reloaders reach for first. Bushings are offered in .001 inch increments, so if your brass or neck wall thickness calls for something else, you can add a bushing later. A good starting point is a bushing about .002 inch under your loaded round measured at the neck. Each die also comes with a Forster Accu-Lock-Ring and an etched reference line, which let you set the die back up exactly the same every session.
Press Compatibility for the Forster Bushing Full Length Die
The die uses the standard 7/8-14 thread and runs in a Forster Co-Ax press or any conventional threaded press. If you're using a non-Forster press, you'll want the correct shellholder recommended by that press maker. Co-Ax users don't need a shellholder at all. Made in the U.S.A.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: FBK4555
- UPC: 757253990564
- Caliber: 7mm PRC
- Die Type: Bushing Full Length Sizing Die
- Included Bushings: .308, .310, .312
- Bushing Increments: 0.001 inch
- Thread: 7/8-14
- Lock Ring: Forster Accu-Lock-Ring with etched reference line
- Material: Hardened steel
- Country of Origin: Made in U.S.A.
- Shipping Weight: 0.59 lbs
What’s Included
- One Forster 7mm PRC bushing full length sizing die
- Three neck bushings (.308, .310, .312)
- Forster Accu-Lock-Ring with etched reference line
- Decapping assembly
- Instructions
Frequently Asked Questions
Which bushings come with the Forster 7mm PRC bushing die kit?
The kit includes three neck bushings sized .308, .310, and .312. Forster picks these as the sizes most 7mm PRC reloaders need to start with. If your brass calls for a different size, bushings are available separately in .001 inch increments.
How do I pick the right bushing size?
Measure the neck diameter of a loaded round, then choose a bushing roughly .002 inch smaller than that measurement. That gives you solid bullet grip without over-working the brass. The three included bushings cover most common neck wall thicknesses for the 7mm PRC.
Will this die work in my press?
Yes, it uses the standard 7/8-14 thread and runs in a Forster Co-Ax press or any conventional threaded reloading press. If you're running a non-Forster press, use the shellholder recommended by that press maker. Co-Ax presses don't require a shellholder at all.
Does this die bump the shoulder and set headspace?
It does. The die sizes the case neck and body, and bumps the shoulder back to establish correct headspace for a minimum-spec SAAMI chamber. The Accu-Lock-Ring and etched reference line let you make precise .001 inch shoulder bump adjustments and repeat your setup every time.



Reviews
There are no reviews yet.