0
0

Forster 6.5 Grendel No-Go Headspace Gage | HG65GRENN Steel

UPC: 757253991097

$38.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who's built a 6.5 Grendel upper knows the caliber can be a little finicky about bolt and barrel matching, and that's exactly where a good headspace gage earns its keep. Forster's No-Go gage gives you a simple pass/fail check on your chamber length so you can catch a problem on the bench instead of at the range. Drop it in the chamber with a stripped bolt, and if the bolt closes on the No-Go, that's your cue to slow down and take a closer look before firing.

Headspace is the distance between the bolt face and the point in the chamber that stops the cartridge, and getting it right matters for both safety and accuracy. A chamber that's too long can leave brass unsupported, which is bad news when you touch off a round. This gage represents the maximum headspace Forster recommends when chambering a new bolt-action barrel. It's worth noting the No-Go is not a SAAMI-maximum measurement, so a bolt that closes on it isn't automatically unsafe. It just means you've gone past the tight tolerance Forster likes to see, and a field gage is the next step to know for sure.

Why the Forster No-Go Gage Belongs on Your Bench

Forster has been grinding gages since 1935, and these are made from A2 tool steel held to tolerances within roughly fifteen ten-thousandths of an inch. The caliber and gage type are printed right on the side, so there's no guessing which one you've got in your hand when you're elbow-deep in a build. That kind of consistency is why Forster is one of the two names most builders trust for headspace work.

Getting the Most Out of Your 6.5 Grendel Headspace Gage

For the cleanest reading, use a stripped bolt with the extractor and ejector removed so those parts don't fight the gage and throw off your result. A common trick among Grendel builders is to stick a thin piece of tape on the base of the No-Go to mimic a field gage if you want a little more certainty. Pair it with a Go gage and you've got both ends of the window covered for setting up a barrel right the first time.

Key Specifications

  • Caliber: 6.5 Grendel
  • Gage Type: No-Go
  • Manufacturer: Forster Products
  • Manufacturer Part Number: HG65GRENN
  • UPC: 757253991097
  • Material: A2 Tool Steel
  • Tolerance: Within 0.00015 inch
  • Color: Steel
  • Length: 1.34 inches
  • Quantity: 1
  • Standards: Ground to ANSI and SAAMI tolerances

What’s Included

  • 1 Forster 6.5 Grendel No-Go headspace gage

Frequently Asked Questions

What does it mean if my bolt closes on the Forster 6.5 Grendel No-Go gage?

The No-Go gage is set to the maximum headspace Forster recommends for a new barrel, not the SAAMI maximum. If your bolt closes on it, the chamber isn't automatically unsafe, but it has gone past that tight recommended tolerance. Checking it with a field gage is the next step to confirm whether it's still safe to fire.

How do I use the No-Go gage correctly?

Use a stripped bolt with the extractor and ejector removed so those parts don't interfere with your reading. Drop the gage in the chamber and try to close the bolt with light pressure. On a properly headspaced barrel, the bolt should not close on the No-Go gage.

Do I need a Go gage too, or is the No-Go enough?

The No-Go tells you if your headspace is too long, but it won't tell you if it's too short. Pairing it with a Go gage lets you confirm both ends of the acceptable window, which is the ideal setup when chambering or fitting a new barrel. Many builders keep both on hand for a complete check.

Will this work for checking a 6.5 Grendel AR-15 build?

Yes. The 6.5 Grendel is known for being particular about bolt and barrel matching, so checking headspace before firing is smart practice. Verify the bare barrel and stripped bolt before assembly, then confirm again once the upper is together.

Additional information

UPC

757253991097

Manufacturer

Manufacturer Part Number

HG65GRENN

Color

Steel

Length

1.34''

Quantity

1

Shipping Weight

0.07

Style

No Go Gauge

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5 Grendel No-Go Headspace Gage | HG65GRENN Steel”