Description
The FN 509 LS Edge takes everything that made the 509 family popular and turns the dial up. The long slide houses a 5-inch hammer-forged, target-crowned barrel that delivers a 6.7-inch sight radius and wrings out every bit of accuracy 9mm has to offer. The slide itself features dual-purpose lightening cuts that reduce reciprocating mass for faster recoil recovery while doubling as front serrations for a clean, purposeful look. Finish is a long-wearing graphite PVD that handles hard use without complaint.
FN's Low-Profile Optics Mounting System is one of the best implementations in the industry. Four MRD mounting plates are included right in the box, covering the most popular red dot footprints without any milling or gunsmithing. When running irons, the fiber optic front sight co-witnesses through the blackout rear notch for a fast, uncluttered sight picture. The trigger is where FN really separated the LS Edge from standard 509 variants. A new conical striker drops the pull weight by roughly a pound compared to the base model, and the flat-face design breaks cleanly at 90 degrees with a short reset built for quick follow-up shots.
Ergonomics are equally well thought out. The flared aluminum magwell speeds reloads under pressure, and the graphite anodized aluminum base pads on the magazines help them drop free consistently. Oversized ambidextrous controls mean both hands work equally well, and the two interchangeable backstraps let you dial in fit for your specific grip. The Mil-Std 1913 Picatinny rail handles any standard weapon light without adapters.
This specific model (MPN 66-100940) ships with three 10-round magazines and is otherwise identical in features, finish, and performance to the full-capacity version. It is a serious platform for competition shooters, serious range work, and anyone who wants a factory-built pistol that genuinely does not need aftermarket help to perform at a high level right out of the box.
Key Specifications
- Manufacturer: FN America
- MPN: 66-100940
- UPC: 845737013158
- Caliber: 9mm Luger
- Action: Striker-Fired, Double Action Only
- Barrel Length: 5"
- Barrel Type: Hammer-Forged, Target-Crowned
- Overall Length: 8.2"
- Sight Radius: 6.7"
- Weight (Unloaded): 31 oz.
- Capacity: 10+1
- Sights: Fiber Optic Front / Blackout Notch Rear
- Optics System: FN Low-Profile Optics Mounting System (4 MRD plates included)
- Frame Material: Polymer with Mil-Std 1913 Picatinny Rail
- Slide Finish: Graphite PVD
- Trigger Pull: 4.5 – 6.7 lbs.
- Safety: Trigger Safety (No Manual Safety)
- Magazines Included: 3x 10-Round
What’s Included
- FN 509 LS Edge Pistol
- 3x 10-Round Magazines with Graphite Anodized Aluminum Base Pads
- 4 MRD Mounting Plates
- 2 Interchangeable Backstraps
- FN Ballistic Case
- Locking Device
- Owner's Manual
Frequently Asked Questions
What red dot optics are compatible with the FN 509 LS Edge?
The FN Low-Profile Optics Mounting System is one of the most versatile factory setups on the market, and the pistol ships with four MRD mounting plates that cover the most popular red dot footprints. This includes optics using RMR, DeltaPoint Pro, and Doctor-style footprints, among others. No slide milling is required, so you can mount a red dot straight out of the box.
Does the FN 509 LS Edge come with night sights?
No, the LS Edge ships with a green fiber optic front sight and a blackout rear notch rather than tritium night sights. The fiber optic provides excellent visibility in daylight and is designed to co-witness with a mounted red dot optic. For low-light use, pairing it with an MRD is the most practical solution given how the platform is set up.
Can I use standard FN 509 17-round magazines in this pistol?
The LS Edge uses the same magazine body as the FN 509 Tactical, and it is also compatible with the FN 509 24-round extended magazine. This version ships with three 10-round magazines, but the pistol itself will accept higher-capacity 509 magazines. It is worth noting that the flared aluminum magwell on the LS Edge is designed specifically for the LS Edge magazines, so confirm fitment with any specific magazine before purchasing in bulk.
What makes the LS Edge trigger different from a standard FN 509?
FN redesigned the striker assembly on the LS Edge with a new conical striker that reduces trigger pull weight by approximately one pound compared to the base 509 models. The flat-face trigger breaks cleanly at 90 degrees with a short take-up and a positive, tactile reset. It is a meaningful improvement that translates directly to faster, more consistent shots without needing an aftermarket trigger kit.
Is the FN 509 LS Edge good for competition shooting?
The LS Edge was very much designed with competition in mind. The longer slide and barrel improve sight radius and muzzle velocity, the lightening cuts help the slide track and recover quickly, and the flared aluminum magwell with weighted base pads is built for fast reloads. It fits classes like Production or carry-optics depending on the ruleset of your match, and the factory feature set means most competitors can run it competitively without any modifications.
Does this model have a manual safety?
No, the FN 509 LS Edge does not have an external manual safety. It relies on a trigger safety integrated into the flat-face trigger blade, consistent with how most modern striker-fired duty and competition pistols are set up. The trigger safety prevents the pistol from firing unless the trigger is deliberately pressed straight through, which is a well-established and reliable design approach.



Reviews
There are no reviews yet.