Description
Hornady built its FMJ handgun line to be the workhorse of the reloading bench, and this 10mm .400 diameter 180-grain flat point is a prime example. These are component bullets for handloaders, not loaded ammunition, so you'll be seating them over your own powder and primers to build consistent target and practice rounds. The flat nose profile and protected tip make them a reliable feeder through semi-automatic pistols, which is exactly what you want when you're running a magazine dump at the range.
What Sets the Hornady 10mm FMJ-FP Apart
The core of each bullet is cold swaged from pure lead, which keeps the weight and balance uniform from one projectile to the next. That consistency translates directly into stable flight and tighter groups downrange. The copper jacket is drawn tight and designed to resist the deformation and jacket separation that plagues cheaper plated bullets, so you get dependable performance shot after shot.
Loading the 400471 for Your 10mm or .40
At .400 diameter and 180 grains, this is one of the most popular bullet weights for both 10mm Auto and .40 S&W handloads. Hornady removed the expansion-aiding skives since action pistol shooting doesn't call for expansion, leaving a sleek projectile tuned for accuracy and feeding. The flat point gives you a clean hole in paper targets and runs smoothly through feed ramps, making these a solid choice for IDPA, USPSA, steel matches, or plain old plinking.
Why Handloaders Keep Reaching for Hornady FMJ
If you're loading in volume, the 500-count box keeps you stocked for plenty of range trips without constant reordering. Hornady's reputation for tight tolerances and quality control means less sorting and fewer surprises when you're developing a load. These are made in the USA to the same standards that back the rest of the Hornady component lineup.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 400471
- UPC: 090255700978
- Caliber: 10mm (.40 Caliber)
- Bullet Diameter: .400"
- Bullet Weight: 180 Grain
- Bullet Type: Full Metal Jacket Flat Point (FMJ-FP)
- Core Material: Lead
- Jacket Material: Copper
- Sectional Density: .161
- Cannelure: No
- Quantity: 500 Per Box
- Country of Origin: United States
What’s Included
- 500 Hornady 10mm .400 diameter 180-grain FMJ-FP reloading bullets
Frequently Asked Questions
Are the Hornady 400471 bullets loaded ammunition or just projectiles?
These are component bullets for reloading, not finished cartridges. You'll need your own brass, primers, and powder to assemble complete rounds. They're meant for handloaders building their own 10mm or .40 caliber target loads.
Can I use these .400 diameter bullets for both 10mm Auto and .40 S&W?
Yes. At .400 diameter and 180 grains, these work for handloading both 10mm Auto and .40 S&W, since both cartridges use the same bullet diameter. Just be sure to use the correct load data for whichever cartridge you're building.
Do these Hornady FMJ bullets have a cannelure?
No, this 180-grain FMJ flat point does not have a cannelure. You'll want to apply a taper crimp appropriate for your 10mm or .40 S&W loads to hold the bullet securely. The flat point and protected nose help with reliable feeding in semi-auto pistols.
What makes these a good choice for competition and range use?
Hornady cold swages the pure lead core for consistent weight and balance, which helps deliver match-grade accuracy. The design drops the expansion skives since action pistol shooting doesn't need expansion, giving you a clean-flying, clean-feeding bullet. That makes them well suited for USPSA, IDPA, steel matches, and high-volume practice.





Reviews
There are no reviews yet.