Description
If you load for 10mm Auto or .40 S&W and you want a range bullet that shoots straight without breaking the bank, Hornady's 180gr FMJ Flat Point is a longtime go-to. This .400" projectile has been a standard for target and competition work for years, and the reason is simple: it's built right. The core is cold swaged from pure lead for consistency and balance, and the jacket wraps the nose so there's no exposed lead to foul your bore or hang up on the feed ramp.
What Sets the Hornady 180gr FMJ-FP Apart
The big story here is Hornady's AMP (Advanced Manufacturing Process) jacket. Thin-plated bullets from some makers tend to distort or separate on impact, but the AMP jacket is drawn with near-zero tolerance for concentricity and wall thickness variation. That translates to a bullet that flies true and punches clean holes in paper. Hornady also pulled the expansion skives since you don't need expansion for punching targets, and the result is a sleeker, more accurate projectile.
Loading the 10mm .400" FMJ Flat Point
This bullet carries a G1 ballistic coefficient of .188 and a sectional density of .161. The flat nose profile feeds reliably in most semi-auto platforms and gives you a clean, defined hole on paper that's easy to score. At 180 grains it's right in the sweet spot for 10mm and .40 loads, whether you're building a soft-shooting plinking load or a heavier full-power 10mm recipe. Keep in mind these are components for handloading and not loaded ammunition, so you'll need your own brass, primers, and powder.
For anyone running an action pistol game, feeding a high-volume range habit, or just topping off the reloading bench, this is a dependable, proven projectile that does exactly what it promises. Hornady has had this one dialed in for a long time, and it shows on target.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 40047B
- UPC: 090255600216
- Caliber: 10mm / .40 Caliber
- Bullet Diameter: .400"
- Bullet Weight: 180 Grain
- Bullet Style: Full Metal Jacket Flat Point (FMJ-FP)
- Ballistic Coefficient: .188 (G1)
- Sectional Density: .161
- Jacket: AMP (Advanced Manufacturing Process)
- Core: Swaged Pure Lead
- Application: Target, Competition, Reloading
- Quantity: 2000
What’s Included
- 2000 Hornady 180gr .400" FMJ Flat Point reloading bullets
Frequently Asked Questions
Are these Hornady 10mm 180gr FMJ-FP bullets loaded ammunition?
No, these are reloading components only. You get the projectiles by themselves, so you'll need to supply your own brass, primers, and powder to assemble finished rounds. They are not ready to shoot straight out of the package.
Can I use these .400" bullets for both 10mm and .40 S&W?
Yes. The .400" diameter works for both 10mm Auto and .40 S&W since the two share the same bullet diameter. Just be sure to work up loads using published data for whichever cartridge you're building.
What makes the flat nose design worth choosing for range work?
The flat point cuts cleaner, more defined holes in paper, which makes scoring targets easier in competition and practice. The profile also feeds reliably through most semi-auto handguns, and with no exposed lead at the tip it helps prevent jams during a string of fire.
Will these FMJ bullets expand on impact?
No, they're built as non-expanding target projectiles. Hornady removed the expansion-aiding skives from this bullet because expansion isn't needed for target and action pistol shooting. That design choice helps deliver the consistent accuracy these bullets are known for.




Reviews
There are no reviews yet.