$77.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Kimura QD Flash Hider from Fletcher Rifle Works is built for guys running a suppressor host in 5/8×24 who want their flash hider to actually pull double duty as a mount. Machined from 17-4 PH stainless and heat treated to the H900 condition, this thing is set up to handle repeated mounting and dismounting without the taper lock wearing loose over time. It's a small part, but it's the kind of part that either works flawlessly every time you thread a can on, or becomes the thing you're cursing at the range. Fletcher built the Kimura to be the former.
This particular Kimura is set up with a 90 degree shoulder, which is one of two shoulder options Fletcher offers alongside a Sig taper version. That 90 degree shoulder is designed to interface with Plan B and Q Cherry Bomb adapters, so if you're already running that mounting ecosystem or planning to build around it, this flash hider slots right in without needing an extra adapter in the mix. The taper on taper contact these systems rely on is what keeps your can indexed the same way every single time you take it off and put it back on, which matters if you care about your point of impact staying consistent between suppressed and unsuppressed shots.
The .375 bore keeps the Kimura open enough for common 5/8×24 chamberings without choking down your muzzle blast in a way that kills flash suppression. Install is straightforward with a standard 3/4 inch wrench, no specialty tools required, and the 17-4 stainless construction means you're not going to be babying this thing about heat or corrosion after a long session at the range. It's a compact piece that does its job at the muzzle and then gets out of the way once you thread your suppressor on.
For anyone running a .308 or similar caliber AR pattern build with a Cherry Bomb or Plan B setup already in the mix, the Kimura gives you a flash hider that isn't just sitting there looking tactical. It's earning its spot on the end of your barrel.
This version of the Kimura is machined with a 90 degree shoulder specifically for Q Cherry Bomb and Plan B QD adapters. If you're already running that mounting system on your suppressor, the Kimura threads on and gives you a taper lock connection without needing any extra hardware.
As long as your barrel is threaded 5/8×24, the Kimura will thread right on. That thread pitch is standard on most .308 and similar caliber AR pattern uppers, so it's a common fit for that class of rifle.
Fletcher offers the Kimura in two shoulder styles, and the shoulder is basically the part that seats against your barrel's crown. The 90 degree version gives you a flat, squared seating surface, while the Sig taper option is cut to match Sig's tapered muzzle interface, so which one you need comes down to how your barrel is machined.
A standard 3/4 inch wrench is all you need to torque the Kimura down. No proprietary tools or adapters required, which keeps installation quick whether you're doing it at home or at the bench.
| UPC | 850044307562 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | KIMURA5/8X2490 |
You must be logged in to post a review.
Reviews
There are no reviews yet.