$58.99
57 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Firefield Charge AR brings practical dual functionality to your AR platform without the bulk or weight penalty. At just 3.4 ounces, this combo unit delivers a 5mW red laser that's visible out to 20 yards in daylight and extends to 300 yards after dark, paired with a 180-lumen LED that cuts through total darkness for target identification. Whether you're setting up for home defense, night hunting, or tactical training, having both tools on one compact platform saves rail space and keeps your system lean.
The real advantage here is flexibility without complexity. The laser alone can run for up to 40 hours on a single CR2 battery, while the light manages 3.5 hours at full brightness. You get independent control through both a push button and the included pressure pad, so you can choose which tool to activate depending on your situation. The aluminum housing handles recoil impact up to 800g and carries an IP55 water resistance rating, which means light rain won't kill your zero. Windage and elevation adjustments are continuously tunable, giving you smooth fine-tuning rather than stepped increments that force compromises.
This isn't a pretender to duty-grade performance, but it's built to stay put once you get it dialed. The Charge AR mounts securely to standard Picatinny or Weaver rails and won't shift around during normal use if your mount is properly tensioned. The matte black finish keeps it quiet and won't catch light when you don't want it to. One critical point: like any laser sight, this needs to be properly zeroed for your specific setup and ammunition—don't assume a bore sight is enough. Zero it at the distance where you'll actually use it, and check that zero periodically, especially after transport or impact. A few shots at 10-15 yards to establish point of impact, then confirm at your final zero distance, takes minimal ammunition and gives you real confidence in the system.
The 5mW red laser is visible in daylight out to about 20 yards when conditions are clear, but you'll get much better visibility in indoor environments or overcast conditions. At longer distances or in bright sunlight, you may need to rely more on the light itself for target identification. This is why many people pair it with iron sights or a red dot as their primary aiming reference during daytime use.
Start by ensuring your mount is tight and secured to the manufacturer's specs, then bore-sight or roughly align the laser to your target at 10-15 yards. Fire a three-shot group using your iron sights or primary optic to establish actual point of impact, then adjust the windage and elevation knobs to move the laser dot to match those bullet holes. Move back to your final zero distance (25, 50, or 100 yards depending on your use) and confirm with another group. Re-check your zero periodically and always after any impact, transport, or cleaning that involved removing the unit.
The laser alone runs about 40 hours on one CR2 battery, while the flashlight gets 3.5 hours of continuous use. Since both functions use the same battery, you'll want to manage your usage patterns accordingly. CR2 batteries are readily available at most pharmacies, camera shops, and online retailers—they're not obscure or expensive, so carrying a spare is practical.
Budget laser sights can experience zero shift from recoil, thermal changes, or loose mounting. The Charge AR is built with aluminum construction and a solid mount, but zero shift can happen with any laser if the mount isn't tight or if the unit takes a hard impact. A tight Picatinny mount and occasional zero verification will keep you solid. Avoid over-tightening the mount screws, which can crack the aluminum, but do use a torque wrench and consider a drop of blue thread-locker to prevent vibration loosening.
| UPC | 812495021718 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FF25008 |
| Dot Size | 1.50" at 50 Yds |
| Mount Type | Picatinny/Weaver |
| Power | 5mW |
| Shipping Weight | 0.38 |
You must be logged in to post a review.
Reviews
There are no reviews yet.