Description
The Firefield Charge AR is a straightforward, no-frills red laser that does its job without adding much weight to your rifle. At just 2.4 ounces, it mounts cleanly on any standard Picatinny or Weaver rail and stays out of the way until you need it. The 5mW red laser delivers a sharp 3.0 MOA dot that's visible out to 20 yards in daylight and reaches 300 yards in the dark, which covers most practical shooting scenarios. It runs on a single CR2 battery for roughly 40 hours of continuous operation.
Operating the Charge AR With Simplicity in Mind
You get two ways to activate this laser: a push button on the unit itself or an included pressure pad that lets you fire it up with your thumb without changing your grip. The windage and elevation adjustments are straightforward to dial in, and they have generous adjustment ranges (410 MOA windage, 468 MOA elevation) so you won't run out of room when zeroing. Once you've sighted it in, the continuous adjustment system holds it steady.
Built to Handle Field Use
The aluminum housing is impact-resistant and rated to handle 800 G's of recoil without issue. It's also water-resistant to IP55 standards, so dust and light moisture won't cause problems during normal use. The matte black finish doesn't reflect light, keeping the sight low-profile and blending with the rest of your rifle setup.
Good Entry Point for Red Laser Aiming
This laser works well for target acquisition when you want a quick sight picture without the cost of premium options. It's purpose-built for AR-platform rifles and pairs well with your existing optics or irons.
Key Specifications
- Manufacturer: Firefield
- Model Number: FF25006
- UPC: 812495021695
- Laser Type: 5mW Red Class IIIA
- Dot Size: 3.0 MOA (1.5 inches at 50 yards)
- Visible Range: 20 yards day / 300 yards night
- Battery Type: CR2
- Battery Life: Approximately 40 hours
- Mount Type: Picatinny/Weaver
- Weight: 2.4 ounces
- Length: 56mm
- Width: 42mm
- Height: 28mm
- Material: Aluminum
- Finish: Matte Black
- Water Resistance: IP55
- Impact Resistance: 800 G's
- Windage Adjustment: 410 MOA
- Elevation Adjustment: 468 MOA
- Wavelength: 630-650nm
What’s Included
- Firefield Charge AR Red Laser Sight
- CR2 Battery
- Pressure Pad Remote
- Adjustment Tool
Frequently Asked Questions
How long does the CR2 battery last in the Charge AR?
The CR2 battery provides approximately 40 hours of continuous runtime. Actual battery life may vary depending on usage patterns and environmental conditions. Since the laser can be operated via pressure pad for momentary activation, you can extend battery life by using it only when needed rather than leaving it on continuously.
Is the Firefield Charge AR waterproof for rainy conditions?
The Charge AR is water-resistant with an IP55 rating, meaning it can handle dust and light spray from rain. It's not designed for submersion or extended exposure to heavy water intrusion, but it performs well in typical field conditions including morning dew and light precipitation.
Can I use this laser sight with other optics mounted on my AR?
Yes, the Charge AR is compact and low-profile enough to be mounted alongside other optics like a riflescope or red dot, or used as a standalone sight. The key is having enough Picatinny or Weaver rail space. Many shooters mount laser sights forward on the handguard rail or offset to keep them clear of primary optics.
What's the best way to zero in the Charge AR laser sight?
Use the included adjustment tool to turn the windage and elevation knobs until your laser dot aligns with your point of impact at a known distance (typically 25 or 50 yards). Start by bore-sighting or using a laser bore-sight tool to get close, then fine-tune with live fire. The continuous adjustment system makes dialing it in straightforward.





Reviews
There are no reviews yet.