Description
Fierce built its name on high-end carbon barrel mountain rifles, and the Twisted Rogue takes a lot of what makes those guns special and puts it into a package a lot more hunters can get behind. You still get the proven Fierce 2-lug stainless action on a 700-pattern receiver, a spiral fluted bolt with a fast 70 degree throw, and an adjustable Bix'n Andy trigger that breaks clean and light. The precision machined, match grade #4 contour steel barrel wears deep spiral fluting to shave weight and add rigidity, and the whole rifle comes in at 6.1 pounds before glass.
Why the Twisted Rogue and 7mm Backcountry Belong Together
The 7mm Backcountry was designed from the start to run hard out of short barrels, sending 170 grain bullets around 3,000 fps from a 20 inch tube. That is territory that used to demand a 24 inch magnum barrel. Pair that with the 5/8×24 threaded muzzle and you can hang a suppressor on this rifle without ending up with something that handles like a fence post in the timber. The included NIX side port self-timing brake keeps recoil manageable if you would rather run it bare, and the 1:8 twist stabilizes the heavy, high BC bullets this cartridge was built around.
A Rogue Stock Built for the Backcountry
The carbon fiber Sonora Rogue stock is where this rifle really feels dialed for the mountains. The LR negative comb keeps your cheek weld consistent under recoil, QD flush cup mounts replace old-school sling studs, and there is a flush-fitting rail up front for direct bipod attachment. Feeding comes from a 3+1 internal box magazine with a hinged floorplate, so there is no detachable mag to lose or rattle. A two-position thumb safety and drilled and tapped receiver round it out, and the smoked bronze Cerakote finish shrugs off weather and looks sharp doing it.
Where the Twisted Rogue 7mm BC Fits
At 42.5 inches overall, this is a genuine do-it-all hunting rifle: light enough for sheep country, compact enough for a whitetail blind, and flat-shooting enough for long pokes across a sage flat. If you have been eyeing a Fierce but wanted a practical, hunt-ready build, this is the one to handle.
Key Specifications
- Manufacturer Part Number: TWROG7MMBC20BRS
- UPC: 853418400500
- Caliber: 7mm Backcountry
- Action: Fierce 2-Lug Stainless Steel Bolt Action, 700-Pattern Receiver
- Barrel: 20" Match Grade #4 Contour, Deep Spiral Fluted Steel
- Muzzle Thread: 5/8×24, NIX Side Port Self-Timing Brake Included
- Twist Rate: 1:8
- Capacity: 3+1 Internal Box Magazine, Hinged Floorplate
- Trigger: Adjustable Bix'n Andy
- Bolt: Spiral Fluted, 70 Degree Throw
- Stock: Sonora Carbon Fiber Rogue with LR Negative Comb
- Attachment Points: QD Flush Cup Mounts, Integral Front-Access Bipod Rail
- Safety: Two-Position Thumb Safety
- Overall Length: 42.5"
- Weight: 6.1 lbs
- Finish: Smoked Bronze Cerakote
What’s Included
- Fierce Firearms Twisted Rogue bolt action rifle
- NIX side port self-timing muzzle brake
- Owner's manual and factory paperwork
- Factory box
Frequently Asked Questions
Is the Twisted Rogue's barrel threaded for a suppressor?
Yes, the 20 inch barrel is threaded 5/8×24, which fits most common suppressors as a direct thread option. The 7mm Backcountry cartridge was designed specifically to deliver full performance from a 20 inch barrel, so adding a can keeps the overall package short and handy instead of pool-cue long. A NIX side port self-timing brake comes on the rifle from the factory.
What kind of velocity does 7mm Backcountry get from this 20 inch barrel?
This is the cartridge's whole party trick. Its high-pressure steel alloy case pushes 170 grain bullets right around 3,000 fps from a 20 inch barrel, numbers that traditionally required a 24 inch magnum barrel. That means flat trajectories and serious downrange energy on elk-sized game from a rifle that is genuinely easy to carry.
Does the Twisted Rogue use a detachable magazine?
No, it feeds from a 3+1 internal box magazine with a hinged floorplate. A lot of backcountry hunters prefer this setup since there is no magazine to drop in the snow or rattle in your pack. Unloading is quick and easy through the floorplate release tucked inside the trigger guard.
Can I mount a scope and bipod on this rifle easily?
Yes. The 700-pattern receiver is drilled and tapped, so bases and rings for a Remington 700 footprint are widely available. Up front, the stock has an integral flush-fitting rail with front access for direct bipod attachment, plus QD flush cup sockets for your sling instead of traditional swivel studs.





Reviews
There are no reviews yet.