Description
Fierce Firearms built its reputation on lightweight carbon barrel hunting rifles, and the Carbon Rage is a big part of why. This right-hand model in 6.5 PRC pairs a 24-inch Fierce C3 carbon fiber barrel with a match-grade, hand-lapped liner and a 1:8 twist that stabilizes the long, high-BC bullets the PRC was designed around. At roughly 6.3 pounds bare, it carries like a mountain rifle should, and the included stainless radial muzzle brake takes the sting out of the PRC's push so you can spot your own hits.
Inside the Carbon Rage Action
The heart of this rifle is the Fierce Triad 3-lug bolt action with a short 70 degree bolt throw. That fast lift keeps your hand clear of larger scope eyepieces and makes follow-up shots quicker when it matters. A 3-position safety lets you cycle rounds out of the chamber with the safety still engaged, and the detachable Speed Box magazine holds 3 rounds with one more in the pipe. The trigger deserves its own mention: Fierce fits a Bix'n Andy adjustable unit that breaks clean and crisp, the kind of trigger you usually pay extra to upgrade to.
A Carbon Fiber Stock That Earns Its Keep
The Fierce Tech C3 stock is a streamlined carbon fiber Monte Carlo design with a solid carbon bedding system and an integral rail up front for clipping on a bipod without hunting down adapters. The Phantom Camo finish pairs with a Tungsten Gray Cerakote receiver for a setup that blends into rocky, open country and shrugs off weather.
Why the Rage in 6.5 PRC Makes Sense
The 6.5 PRC is one of the best all-around western hunting cartridges going, with flat trajectories and enough energy for deer, antelope, and elk at respectable distances. In a rifle this light with this level of barrel and trigger quality, it is a natural fit for backcountry hunts where every ounce and every shot counts. Fierce backs its rifles with a limited lifetime warranty, so this is a rig you can build a lot of seasons around.
Key Specifications
- Manufacturer: Fierce Firearms
- Model: Carbon Rage
- MPN: FCRG65PRC24TP
- UPC: 853418462348
- Caliber: 6.5 PRC
- Action: Fierce Triad 3-lug bolt action, 70 degree bolt throw
- Barrel: 24" Fierce C3 carbon fiber, match grade, threaded
- Twist Rate: 1:8
- Capacity: 3+1, detachable Speed Box magazine
- Trigger: Bix'n Andy adjustable
- Safety: 3-Position
- Stock: Fierce Tech C3 carbon fiber Monte Carlo, Phantom Camo
- Receiver Finish: Tungsten Gray Cerakote
- Muzzle Device: Radial muzzle brake, stainless steel
- Weight: Approx. 6.3 lbs
- Hand: Right
What’s Included
- Fierce Carbon Rage bolt action rifle
- 1 detachable Speed Box magazine
- Radial stainless steel muzzle brake (installed)
Frequently Asked Questions
Can I run a suppressor on the Carbon Rage 6.5 PRC?
Yes. The 24-inch carbon fiber barrel is threaded, and the factory radial brake spins off so you can mount a suppressor in its place. Just make sure your can's thread pitch matches the muzzle threads before ordering a direct-thread mount.
Is the Carbon Rage trigger adjustable?
It is. Fierce ships this rifle with a Bix'n Andy match-grade trigger, which is a premium unit known for a crisp, clean break. You can fine-tune the pull weight to your preference, which is a nice touch on a factory hunting rifle.
How heavy is the Fierce Carbon Rage for backcountry hunting?
This configuration comes in around 6.3 pounds bare, which is genuinely light for a full-size 6.5 PRC rifle. Add a mid-weight scope and sling and you are still looking at a very packable rig for steep country. The carbon fiber barrel and C3 stock are where most of that weight savings comes from.
What game is the Carbon Rage in 6.5 PRC suited for?
The 6.5 PRC shines on deer, antelope, and sheep, and with well-constructed bullets it handles elk at reasonable ranges too. The 1:8 twist stabilizes heavy-for-caliber bullets in the 140 to 156 grain range, which carry energy well at distance. It is a solid do-it-all western hunting setup.



Reviews
There are no reviews yet.