Description
There are lightweight rifles, and then there are rifles built from the ground up to be carried far and shot farther. The Fierce CT Rage LR is the latter. The receiver is machined from titanium, which shaves real weight where a steel action would add it, and it runs a Triad 3-lug bolt with a short 70 degree throw so you can cycle fast without smacking your scope. Fierce finishes the receiver in black Cerakote and leaves it drilled and tapped, ready for your bases and glass.
Why the CT Rage LR Shoots the Way It Does
The 22 inch barrel is Fierce's C3 carbon fiber design with a match grade, hand-lapped liner that gets stress relieved before it ever leaves the shop. Carbon wrap keeps the profile stiff without the weight penalty, and this one handles strings of fire better than the pencil barrels you find on most mountain rifles. The muzzle comes threaded with a stainless radial brake installed, so you can run the brake or spin on a suppressor. A TriggerTech ProCurve trigger breaks clean and adjusts from 1.5 to 4 pounds, and the 3-position safety lets you cycle the bolt on safe. Every Rage LR ships with a certified target proving its half MOA guarantee.
25 Creedmoor in a True Mountain Rifle
The 25 Creedmoor is one of the more exciting chamberings to hit the hunting world in years. Think of it as the 6.5 Creedmoor's faster, flatter little brother, launching high-BC .25 caliber bullets that buck wind impressively and hit harder than the numbers suggest. For deer, antelope, and open-country work, it is a sweet spot of mild recoil and long-range reach. The C3 Carbon Rage stock rounds out the package with a push button adjustable comb for fast cheek weld tuning behind big optics, plus an integral Picatinny rail up front for clipping on a bipod. Feeding comes from a detachable drop box magazine holding four rounds, with one more in the chamber.
Key Specifications
- Manufacturer: Fierce Firearms
- Manufacturer Part Number: RGETCLR25CM22BM
- UPC: 853418416853
- Action: Bolt Action, Titanium Triad 3-Lug with 70 Degree Bolt Throw
- Caliber: 25 Creedmoor
- Capacity: 4+1, Detachable Drop Box Magazine
- Barrel: 22" C3 Carbon Fiber, Match Grade, Hand-Lapped Liner, Threaded
- Muzzle Device: Stainless Steel Radial Muzzle Brake Included
- Receiver Finish: Black Cerakote, Drilled & Tapped
- Trigger: TriggerTech ProCurve, Adjustable 1.5 to 4 lbs
- Safety: 3-Position
- Stock: C3 Carbon Rage with Push Button Adjustable Comb
- Forend: Integral Picatinny Rail for Bipod Attachment
- Accuracy Guarantee: 1/2 MOA with Certified Target Included
- Warranty: Limited Lifetime
What’s Included
- Fierce CT Rage LR rifle
- One detachable drop box magazine
- Stainless steel radial muzzle brake (installed)
- Certified factory accuracy target
- Owner's manual
Frequently Asked Questions
What is the 25 Creedmoor cartridge good for?
The 25 Creedmoor is essentially a 6.5 Creedmoor necked down to .25 caliber, which lets it push high-BC bullets at impressive speeds with a flat trajectory and mild recoil. It is an excellent pick for deer, antelope, and similar game at extended distances, and it doubles nicely as a long-range target round. Factory ammo support has grown quickly since the cartridge was standardized.
Does the Fierce CT Rage LR come with a muzzle brake?
Yes, it ships with a stainless steel radial muzzle brake already installed on the threaded barrel. If you would rather run a suppressor, just spin the brake off and thread your can on. Either way, the threading gives you options without any gunsmith work.
How accurate is the CT Rage LR out of the box?
Fierce backs this rifle with a half MOA accuracy guarantee, and every Rage LR is test fired at the factory with a certified target included in the box. The match grade carbon fiber barrel is hand lapped and stress relieved, so the accuracy is built in, not a lottery ticket. Pair it with quality glass and ammo it likes and it will hold up its end.
Can I mount a scope and bipod on the CT Rage LR?
Absolutely. The titanium receiver comes drilled and tapped, so you just need bases or rings to get your optic mounted since there are no iron sights. Up front, the forend has an integral Picatinny rail section made specifically for clamping on a bipod, and the push button adjustable comb lets you set your cheek weld to match your scope height.



Reviews
There are no reviews yet.