0
0

Fierce CT Rage 7mm Backcountry 20″ Carbon Titanium Bolt-Action Rifle

UPC: 853418102497

$3,399.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The 7mm Backcountry was built to push 170-grain bullets right around 3,000 fps out of a 20-inch barrel, and the Fierce CT Rage is exactly the kind of rifle that cartridge was dreamed up for. Short barrel, featherweight build, and enough accuracy to make the most of all that speed. Add a suppressor to the 5/8-24 threaded muzzle and you still end up with a package shorter than most bare magnum rifles, which matters a lot more than you think on day four of an elk hunt.

What Makes the CT Rage Tick

The heart of this rifle is the Fierce Triad 3-lug action machined from titanium, with wire EDM cut raceways for a tight, smooth lockup. The spiral fluted, DLC-coated bolt runs a quick 70 degree throw, so there is plenty of clearance under a big scope, and the 3-position safety lets you cycle a round out with the rifle still on safe. The trigger is a genuine Bix'n Andy, adjustable from 1 to 3 pounds, and it breaks about as clean as anything you will find on a factory hunting rifle. Feeding comes from a detachable drop-box magazine holding three rounds plus one in the chamber.

A 20-Inch Barrel That Earns Its Keep

The match grade, hand-lapped 20-inch barrel is stress relieved and topped with a stainless radial muzzle brake to take the sting out of a hot cartridge. Fierce backs the CT Rage with a 1/2 MOA accuracy guarantee at 100 yards and ships a certified test target to prove it.

Built to Carry, Built to Last

The Monte Carlo carbon fiber stock uses a solid carbon bedding system, an integral rail up front for a bipod, and a Limbsaver pad out back. Between the titanium receiver and true carbon construction, this rifle stays light where it counts without going flimsy, and Fierce covers it with a limited lifetime warranty.

Key Specifications

  • Manufacturer: Fierce Firearms
  • Model: CT Rage
  • Manufacturer Part Number: FCTRG7MMBC20BP
  • UPC: 853418102497
  • Caliber: 7mm Backcountry (7mm BC)
  • Action: Bolt Action, Titanium Triad 3-Lug
  • Barrel Length: 20", Match Grade, Hand Lapped
  • Muzzle Thread: 5/8-24
  • Muzzle Device: Stainless Steel Radial Brake
  • Capacity: 3+1, Detachable Drop-Box Magazine
  • Trigger: Bix'n Andy, Adjustable 1-3 lbs
  • Safety: 3-Position
  • Bolt: Spiral Fluted, DLC Coated, 70 Degree Throw
  • Stock: Carbon Fiber Monte Carlo w/ Integral Bipod Rail, Limbsaver Pad
  • Accuracy Guarantee: 1/2 MOA at 100 Yards
  • Warranty: Limited Lifetime

What’s Included

  • Fierce CT Rage bolt-action rifle
  • 1 detachable drop-box magazine
  • Stainless steel radial muzzle brake (installed)
  • Certified factory accuracy target

Frequently Asked Questions

Does the 20-inch barrel on the CT Rage give up much velocity in 7mm Backcountry?

Not really, and that is the whole point of the cartridge. The 7mm Backcountry was designed around 20-inch barrels, pushing 170-grain bullets to roughly 3,000 fps from that length thanks to its high-pressure Peak Alloy case. You get magnum-class performance from a rifle that is noticeably shorter and easier to carry, especially with a suppressor mounted.

Is the Fierce CT Rage suppressor ready?

Yes. The match grade barrel is threaded 5/8-24 and ships with a stainless radial muzzle brake installed. Spin the brake off and most common big-bore suppressors thread right on, and the short 20-inch barrel keeps overall length very manageable with a can attached.

How accurate is the CT Rage out of the box?

Fierce guarantees 1/2 MOA at 100 yards with quality factory ammo and includes a certified test target with the rifle to back it up. Between the hand-lapped match barrel, solid carbon bedding, and the crisp Bix'n Andy trigger, this rifle has the ingredients to shoot well past typical hunting distances.

Can the trigger on the CT Rage be adjusted?

Yes, the CT Rage comes with a Bix'n Andy match grade trigger that adjusts from about 1 to 3 pounds. It arrives set from the factory with a clean, crisp break, so many hunters never touch it. If you prefer a lighter pull for long-range work, the adjustment range gives you room to dial it in.

Additional information

UPC

853418102497

Manufacturer

Manufacturer Part Number

FCTRG7MMBC20BP

Action

Barrel Length

20"

Caliber/Gauge

7mm BC

Capacity

3 + 1

Safety

3 Position

Reviews

There are no reviews yet.

Be the first to review “Fierce CT Rage 7mm Backcountry 20″ Carbon Titanium Bolt-Action Rifle”