0
0

Christensen Arms FFT Varmint Contour Stock – Remington 700 SA, Green

UPC: 696528095668

$599.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been chasing a lighter rifle build without stepping down to a flimsy stock, this is the piece that makes it happen. Christensen Arms uses their Flash Forged Technology to compress and cure aerospace-grade carbon fiber under heat and pressure, creating a monocoque shell that skips the internal filler most stocks rely on. A short action version tips the scale around 18 ounces, which puts it up to a full pound under a conventional carbon fiber composite stock. That kind of weight savings changes how a rifle carries and balances all day in the field.

What Sets the FFT Varmint Contour Stock Apart

The varmint inletting is the key detail here. The barrel channel runs a 1.28 inch taper that narrows to about 1.15 inches toward the muzzle end, so it clears the heavier varmint and bull-profile barrels that a standard sporter cut would choke on. It ships with carbon fiber bedding pillars already built in, a recoil pad, and sling studs front and rear, so the foundation for a solid, repeatable bed is there from the start. Despite the featherweight build, folks who run these report a rigid setup with no noticeable flex, especially on lighter overall builds.

Fitting Your FFT Stock to a Remington 700

This is built for the Remington 700 short action footprint and clones that share it. Spot bedding of the recoil lug is required, and some slight inletting may be needed to get everything sitting just right, so plan for a little fitting time rather than a pure drop-in. If you're pairing it with Christensen Arms bottom metal the fit is dialed, though many builders adapt other components with minor work.

A Note on the Green Finish

Each stock is hand-painted, which means no two come out exactly alike. Minor differences in pattern placement and color intensity from one stock to the next are just part of the process and part of the character. If you plan to Cerakote it down the road, stick with air-dry Cerakote only to protect the carbon shell.

Key Specifications

  • Manufacturer: Christensen Arms
  • Manufacturer Part Number: 810-00059-03
  • UPC: 696528095668
  • Model Compatibility: Remington 700 Short Action
  • Action: Bolt Action
  • Contour: Varmint
  • Material: Flash Forged Technology Carbon Fiber
  • Color: Green
  • Hand Orientation: Right Hand
  • Weight: Approximately 18 oz (short action)
  • Length of Pull: 13.5 inches
  • Barrel Channel: 1.28 in taper narrowing to 1.15 in at muzzle end
  • Bedding Pillars: Carbon fiber, integrated

What’s Included

  • Christensen Arms FFT Varmint Contour carbon fiber stock
  • Integrated carbon fiber bedding pillars
  • Recoil pad
  • Front and rear sling studs

Frequently Asked Questions

Will the FFT Varmint stock fit a standard Remington 700 short action?

Yes, it's cut for the Remington 700 short action footprint and clones built on it. Spot bedding of the recoil lug is required, and some slight inletting may be needed for a clean fit, so budget a little time on the bench rather than treating it as a pure drop-in.

How much lighter is the FFT stock than a normal carbon fiber stock?

A short action FFT weighs in around 18 ounces, which is up to a full pound less than a traditional carbon fiber composite stock. The savings come from the Flash Forged monocoque shell that eliminates the internal filler most stocks use.

What barrel profiles does the varmint contour channel handle?

The varmint channel runs a 1.28 inch taper that narrows to about 1.15 inches near the muzzle, so it clears heavier varmint and bull-profile barrels. A standard sporter-cut stock would be too tight for those, which is why this version exists.

Can I use my factory Remington bottom metal with this stock?

Many builders run it with Christensen Arms bottom metal for the tightest fit, but factory and aftermarket options can work with minor fitting. If you go the factory route, check floorplate and screw clearance and plan for a little sanding or adjustment to seat everything flush.

Additional information

UPC

696528095668

Manufacturer

Manufacturer Part Number

810-00059-03

Action

Color

GREEN

Style

Chassis

Reviews

There are no reviews yet.

Be the first to review “Christensen Arms FFT Varmint Contour Stock – Remington 700 SA, Green”