Description
Weight is the whole story with the FFT Sporter Stock. Christensen Arms took their proprietary Flash Forged Technology and built an aerospace monocoque shell that comes in at roughly 20 ounces in this long action configuration. That is not a typo, and it is the lightest stock the company has ever produced. For anyone building a rifle where ounces add up over miles, that number gets your attention fast.
What Makes the FFT Sporter Stock So Light
Flash Forged Technology compresses and cures aerospace-grade carbon fiber under serious heat and pressure. The result is a stock that can run up to a full pound lighter than traditionally built carbon fiber composite stocks without giving up the rigidity or precision you want under recoil. The shell keeps the mass out of the equation while holding its shape, so your barrel stays free-floated and your groups stay honest. It is finished in a hand-painted green with black and tan accents, and because each one is painted by hand, no two look exactly alike.
Fitting the FFT Sporter Stock to Your Remington 700
This one is cut for the Remington 700 long action footprint with a sporter contour barrel channel that tapers to around .850 inches at the tip of the forearm. It ships with stainless steel bedding pillars, a recoil pad, and sling studs, along with a 13.5-inch length of pull. Spot bedding of the recoil lug is required, and some light inletting may be needed to dial in the perfect fit. If you plan to Cerakote it, stick with air-dry Cerakote only.
Backcountry hunters and custom builders gravitate toward this stock for a reason. Drop it on a lightweight Remington 700 build and you end up with a rifle that carries all day without wearing you down, yet still holds up when you settle in for the shot. It is a smart upgrade for sheep hunts, alpine treks, and any setup where every ounce on your back matters.
Key Specifications
- Manufacturer: Christensen Arms
- Manufacturer Part Number: 810-00059-02
- UPC: 696528095651
- Action: Remington 700 Long Action
- Color: Green with Black & Tan
- Construction: Flash Forged Technology Carbon Fiber
- Weight: Approximately 20 oz (Long Action)
- Length of Pull: 13.5 in
- Barrel Channel: Sporter contour, 1.28 in taper to .850 in at forearm
- Pillars: Stainless Steel
- Sling Studs: Single front and single rear
- Compatibility: Remington 700 footprint actions
What’s Included
- FFT Sporter Stock
- Stainless steel bedding pillars
- Recoil pad
- Front and rear sling studs
Frequently Asked Questions
How much does the FFT Sporter Stock weigh in the long action version?
This long action model comes in at roughly 20 ounces, which makes it the lightest stock Christensen Arms has ever produced. The short action version drops to about 18 ounces. That weight savings comes from the Flash Forged carbon fiber monocoque shell, which can run up to a full pound lighter than traditional carbon fiber composite stocks.
Does the FFT Sporter Stock require any fitting to install on a Remington 700?
Yes, plan on spot bedding the recoil lug, and expect some light inletting to get everything sitting right. The barrel channel is cut for a sporter contour, so it works best with matching barrels. Most builders find the fit dials in with a bit of patient work, and the payoff is a rock-solid, ultralight foundation.
What barrel contour works with the FFT Sporter Stock?
The barrel channel is inletted for a sporter contour, running about 1.28 inches at the action and tapering to roughly .850 inches at the end of the forearm. Heavier bull or varmint contours will not drop in without opening up the channel. If you are running a standard sporter or lightweight hunting barrel, you are in good shape.
Can I Cerakote the FFT Sporter Stock to match my build?
You can, but stick with air-dry Cerakote only since the carbon fiber shell should not go through a high-temperature oven cure. Keep in mind the factory finish is hand-painted, so no two stocks look exactly alike out of the box. If the green with black and tan pattern already fits your rig, you may not need to refinish it at all.



Reviews
There are no reviews yet.