Description
The Christensen Arms FFT Stock for the Remington 700 long action is about one thing above all else: cutting weight where it counts. This gray sporter contour stock is built with Flash Forged Technology, Christensen's own process that compresses and cures aerospace-grade carbon fiber under heat and pressure to form a monocoque shell. Instead of overbuilding the way most stocks do, that design strips out unnecessary internal mass and lands you a stock that runs roughly a pound lighter than standard carbon fiber composite options. For a Remington 700 build meant to go deep into the mountains, that difference adds up fast by the time you're miles from the truck.
What Makes the FFT Sporter Stock Different
The monocoque construction gives you rigidity and a stable shooting platform without the bulk. It comes pre-fitted with stainless steel bedding pillars for consistent action torque and repeatable accuracy over the long haul, plus factory spot bedding at the recoil lug to get you started. The barrel channel is inletted for sporter contour barrels on the Remington 700 long action footprint, and the shape includes a straight comb, an ergonomic grip, integral front and rear sling studs, and a recoil pad already installed.
Fitting Your Christensen Arms FFT Stock
A quick heads up from experience: this is a semi-inlet stock, so some slight fitting is normal. Most builds call for spot bedding the recoil lug and light sanding to float the barrel or clean up the magwell, which is standard territory for a lightweight composite stock like this. If you're comfortable with a basic bedding job or working with a gunsmith, you'll end up with a rock-solid foundation. Folks running these on sheep and mountain rifles consistently report the fit and performance are worth the effort.
Who the FFT Sporter Stock Is Built For
This one shines on ultralight hunting rigs, custom sporter builds, and backcountry precision setups where every ounce matters. The textured gray finish holds up in rough conditions and gives you grip when your hands are cold and wet. Drop it on a Rem 700 long action and you've got the makings of a serious mountain rifle.
Key Specifications
- Manufacturer: Christensen Arms
- Manufacturer Part Number: 810-00058-00
- UPC: 696528095545
- Model: Remington 700
- Action: Bolt Action, Long Action
- Barrel Contour: Sporter
- Color: Gray
- Hand Orientation: Right Hand
- Construction: Flash Forged Technology Carbon Fiber Monocoque
- Length of Pull: 13.5 inches
- Bedding Pillars: Stainless Steel
- Sling Studs: Single Front and Single Rear
- Recoil Pad: Included
- Weight: Approx. 20 oz (Long Action)
- Compatibility: Remington 700 Footprint Actions
What’s Included
- Christensen Arms FFT Sporter Stock
- Installed recoil pad
- Stainless steel bedding pillars (pre-fitted)
- Front and rear sling studs
Frequently Asked Questions
Will the Christensen Arms FFT Stock fit any Remington 700 long action?
Yes, this stock is built for the Remington 700 long action footprint and is inletted for sporter contour barrels. It works with factory Rem 700 actions as well as aftermarket actions that use the same footprint. Keep in mind it's set up for sporter profile barrels, so a heavy varmint or bull contour won't drop right in.
Does the FFT Sporter Stock require bedding or fitting?
Some fitting is expected with this stock. It ships with factory spot bedding at the recoil lug, but most builds call for finishing the bedding and light sanding to fully float the barrel and clean up the inletting. It's a straightforward job for anyone comfortable with basic gunsmithing, or you can have a smith handle it.
How much lighter is the FFT Stock than a standard carbon fiber stock?
Thanks to the Flash Forged Technology monocoque design, this stock runs up to a full pound lighter than traditionally built carbon fiber composite stocks. The long action version comes in right around 20 ounces. That weight savings is the whole point for backcountry and mountain hunting builds.
Does the Christensen Arms FFT Stock come with bottom metal?
No, bottom metal is not included with the stock. It's inletted to work with the Remington 700 hinged floor plate setup, and many owners run Christensen Arms bottom metal or an aftermarket DBM for detachable magazines. You'll want to confirm your bottom metal choice matches the inletting before final assembly.




Reviews
There are no reviews yet.