0
0

Faxon Streamline 10in Carbon Fiber M-LOK Handguard – Free Float AR-15

UPC: 816341022843

$329.00

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Faxon teamed up with Lancer Systems to bring their popular Streamline rail to life in carbon fiber, and the result is one of the lightest free float handguards you can bolt onto an AR-15. At 10.2 inches, this is the shortest option in the Streamline Carbon line, which makes it a natural fit for pistol builds, SBRs, and any upper where trimming weight up front is the goal. Carbon fiber runs roughly ten times stronger than aluminum while shaving off around 40 percent of the weight, so you get a rail that stays stiff and rugged while the whole assembly, steel barrel nut included, comes in near 6.24 ounces.

What the Streamline Carbon Fiber Rail Brings to the Bench

The octagonal profile gives you eight full facets of M-LOK, so there's plenty of real estate for a light, a hand stop, a bipod, or a sling mount without crowding your support hand. Inner diameter is generous enough to tuck common suppressors under the rail, which is a big reason builders reach for this one on quiet, lightweight setups. Because carbon fiber is a poor conductor of heat, the rail stays cooler to the touch through long strings than a comparable aluminum tube, and that pays off during extended range sessions or mag dumps.

Mounting the Faxon Streamline Without the Headache

One of the smarter parts of this design is that it skips proprietary hardware. It clamps onto a standard AR-15 barrel nut using Faxon's patent-pending architecture, so you install it with the same armorer's tools you'd use on a mil-spec rail. Faxon recommends torquing the included steel barrel nut to 30 to 45 ft-lbs, with 40 ft-lbs called out from the factory for best accuracy. Once it's locked down, the clamp system holds position across all three axes and won't work loose on you. Folks who've run it consistently point to clean machining, well-deburred M-LOK slots, and a rail that feels both light and solid in hand.

Key Specifications

  • Manufacturer: Faxon Firearms
  • Manufacturer Part Number: FFHGMLOK10C1
  • UPC: 816341022843
  • Length: 10.2 in
  • Material: Lancer carbon fiber with aerospace aluminum front ring
  • Finish: Black, Type III Hard Anodized components
  • Weight (with steel barrel nut and hardware): 6.24 oz
  • Accessory Mounting: M-LOK across 8 facets
  • Mounting Method: Standard AR-15 barrel nut with clamp architecture
  • Height (Flat to Flat): 1.98 in
  • Max Outer Diameter (Peak to Peak): 2.05 in
  • Max Inner Diameter (Front Aluminum Ring): 1.70 in
  • Design: Free float
  • Platform: AR-15

What’s Included

  • Streamline carbon fiber handguard
  • Steel AR-15 barrel nut
  • 3x cupped hex screws
  • 3x hex nuts
  • Hex wrench
  • All mounting hardware

Frequently Asked Questions

Will the Faxon Streamline 10in handguard fit a suppressor under the rail?

Yes. The internal clearance on the Streamline Carbon is designed to tuck common suppressors under the rail, which is one of the main reasons builders pick it for quiet, lightweight setups. The max inner diameter at the front aluminum ring is 1.70 inches, so check your can's outside diameter against that before you order.

How do I install the Streamline carbon fiber handguard?

It mounts using the included steel AR-15 barrel nut and Faxon's clamp architecture, so standard armorer's tools do the job. Faxon calls for torquing the barrel nut between 30 and 45 ft-lbs, with 40 ft-lbs recommended from the factory for best accuracy. Once clamped down, the rail locks in place across all three axes and stays put.

How light is this handguard really?

The 10.2-inch Streamline Carbon comes in around 6.24 ounces with the steel barrel nut and all mounting hardware included. Carbon fiber runs about 40 percent lighter than aluminum while staying roughly ten times stronger, so you drop noticeable weight up front without giving up rigidity. It's a popular pick for pencil-profile and pistol-length builds where balance matters.

Does the carbon fiber rail get hot during long shooting sessions?

Carbon fiber is a poor conductor of heat, so this rail stays cooler to the touch than a comparable aluminum tube during extended strings of fire. That's a real advantage when you're running a suppressor or putting rounds downrange quickly. Users who've done mag dumps report the exterior of the rail staying comfortable to grip.

Additional information

UPC

816341022843

Manufacturer

Manufacturer Part Number

FFHGMLOK10C1

Length

10

Reviews

There are no reviews yet.

Be the first to review “Faxon Streamline 10in Carbon Fiber M-LOK Handguard – Free Float AR-15”