Description
The Faxon FX7 Prefit in 6mm Creedmoor is a purpose-built barrel for anyone running an FX7 bolt action who wants a true long-range setup without sending parts off to a gunsmith. It threads directly onto the FX7 receiver using the prefit interface, so you skip most of the trial-and-error that comes with a standard barrel swap. You still want to confirm headspace during install with the proper gauges, but the heavy lifting of fitting is already handled.
What Makes the FX7 Prefit Tick
Faxon starts with 416-R stainless, then cuts the bore with 5R button rifling before honing and lapping it to a smooth internal finish. That combination cuts down on fouling and makes cleaning less of a chore over a long season. Every barrel gets magnetic particle inspected (MPI) so you know it left the shop without hidden flaws, and the salt bath nitride finish adds corrosion resistance and wear durability that holds up to hard use. It wraps with a recessed target crown to protect the rifling at the muzzle and 5/8×24 threads that fit common 6mm brakes and suppressor mounts.
Why the 26" 6mm Creedmoor Barrel and M24 Profile Work Together
The M24 contour is a heavy profile modeled after the military M24 sniper barrel, and that extra mass is the whole point. It gives you the rigidity and thermal stability to keep point of impact honest through long shot strings, which is exactly what you want in a PRS or precision build. Pair that with the 26-inch length and you give the 6mm Creedmoor room to wring velocity out of slower powders, which pays off downrange with a flatter trajectory and better wind resistance.
Twist Rate and Bullet Choice on the FX7 6mm Creedmoor
The 1:7.5 twist is the sweet spot most custom barrel makers default to for this cartridge. It stabilizes the heavy 105 to 115 grain match and hunting bullets that make the 6mm Creedmoor shine, where a slower 1:8 can get marginal in the cold or at altitude. Load up your favorite high-BC projectile and this barrel is built to hold it steady. Backed by the Faxon Lifetime Guarantee.
Key Specifications
- Manufacturer: Faxon Firearms
- Manufacturer Part Number: 7F1BC675N26N24Q
- UPC: 816341028760
- Caliber: 6mm Creedmoor
- Barrel Length: 26"
- Twist Rate: 1:7.5
- Profile: M24
- Barrel Material: 416-R Stainless Steel
- Rifling: 5R Button Rifled, Honed & Lapped
- Finish: Salt Bath Nitride (QPQ)
- Muzzle Threads: 5/8×24
- Crown: Recessed Target Crown
- Inspection: Magnetic Particle Inspected (MPI)
- Fitment: Faxon FX7 Action and similar receivers
- Country of Origin: Made in USA
- Warranty: Faxon Lifetime Guarantee
What’s Included
- Faxon FX7 Prefit 26" 6mm Creedmoor M24 barrel
Frequently Asked Questions
Does the FX7 Prefit barrel require a gunsmith to install?
The prefit design is built to thread directly onto the Faxon FX7 receiver, which streamlines the swap compared to a traditional barrel install. You should still verify headspace with proper GO gauges and confirm fitment before firing. If you are not comfortable gauging headspace yourself, having a qualified gunsmith handle final assembly is the safe call.
What bullet weights does the 1:7.5 twist handle best in 6mm Creedmoor?
The 1:7.5 twist is the go-to rate for the 6mm Creedmoor and is dialed in for the heavy 105 to 115 grain match and long-range hunting bullets. That faster twist keeps the high-BC projectiles stable where a slower 1:8 can get marginal in cold weather or at high altitude. Always validate stability for your specific load.
Will this barrel fit anything besides a Faxon FX7 action?
It is engineered for the Faxon FX7 action and receivers that share the same prefit interface. Some builders run FX7 prefits on similar compatible actions, but you should confirm your action specs and headspace requirements before assembly. When in doubt, check with your gunsmith about your particular receiver.
Is the muzzle threaded for a suppressor or brake?
Yes, the muzzle comes threaded 5/8×24, which is a common standard for 6mm and 6.5mm muzzle devices and suppressor mounts. It also features a recessed target crown to protect accuracy. Just make sure your device seats properly and check bore alignment before live fire.





Reviews
There are no reviews yet.