Description
The .338 ARC is Hornady's answer to hunters and suppressor fans who wanted more punch than .300 Blackout could offer, and this 16-inch Faxon Gunner barrel is one of the cleanest ways to feed a standard AR-15 lower into that world. It's cut from 416R stainless steel, button rifled with a 1:8 twist, and wrapped in a Black Nitride finish that shrugs off corrosion and wear. The 1:8 twist is the sweet spot Hornady recommends, stabilizing everything from the 175-grain supersonic BLACK load to the heavy 307-grain Sub-X subsonic round without you having to guess.
What the Gunner Profile Brings to Your .338 ARC Build
The Gunner contour is Faxon's blend of two classic profiles. It keeps the rigidity of a government barrel where you want stiffness but sheds weight like a pencil profile everywhere else. The result pulls the balance point back toward your body, so the rifle points fast and doesn't wear out your support arm during a long day of hog hunting or range time. At right around 1.4 pounds, it hits that middle ground a lot of builders chase.
Threads, Gas, and the Details on This Faxon .338 ARC Barrel
This one runs a pistol-length gas system with a .750 gas block journal and an M4 barrel extension, so it drops into a standard AR-15 upper. The muzzle is threaded 5/8×24, matching common .30-caliber muzzle devices and suppressors, which matters since so much of the .338 ARC's appeal is quiet subsonic shooting. Every Faxon barrel is stress relieved, air-gauge tested, MPI inspected, and individually headspaced with PTG gauges, with an 11-degree target crown finishing off the bore for consistent bullet exit.
Getting the Most Reliability Out of It
Because .338 ARC is still a young cartridge, Faxon suggests pairing this barrel with Duramag magazines built for 400 Legend for the smoothest feeding, and their .338 ARC optimized upper takes the guesswork out of fitment. Some builders may need to tweak feed ramp geometry with certain subsonic loads, so it's worth doing a proper function check before you head out. Manufactured start to finish in Cincinnati, Ohio, and backed by Faxon's lifetime guarantee against manufacturing and material defects.
Key Specifications
- Manufacturer: Faxon Firearms
- Model: Gunner (Match Series)
- Caliber: .338 ARC
- Barrel Length: 16 inches
- Twist Rate: 1:8
- Barrel Material: 416R Stainless Steel
- Finish: Black Nitride
- Barrel Profile: Gunner
- Rifling: Button Rifled
- Gas System: Pistol-Length
- Gas Block Journal: .750 inch
- Muzzle Threads: 5/8×24
- Muzzle Crown: 11-Degree Target Crown
- Barrel Extension: M4
- Weight: 1.40 lbs
- MPN: 15B338A8P16NGQ5RNP3
- UPC: 816341029323
What’s Included
- Faxon Gunner .338 ARC 16" 1:8 AR-15 barrel
Frequently Asked Questions
Will this Faxon Gunner .338 ARC barrel work in a standard AR-15?
Yes. It uses an M4 barrel extension and a .750 gas block journal, so it fits standard AR-15 uppers. Keep in mind .338 ARC still needs the correct bolt, magazines, and ideally a matched upper for the best feeding, since it's a larger case than typical 5.56 builds.
What twist rate is best for .338 ARC, and does this barrel have it?
The 1:8 twist on this barrel is exactly what Hornady recommends for .338 ARC. It stabilizes both the 175-grain supersonic load and the heavy 307-grain subsonic Sub-X round, so you can run one barrel for hunting, target work, and suppressed shooting without swapping anything.
Is the muzzle threaded for a suppressor?
It is. The muzzle comes threaded 5/8×24, which matches most .30-caliber muzzle devices and suppressors. That's a big part of the .338 ARC's appeal, since the subsonic 307-grain load pairs beautifully with a can for quiet, hard-hitting performance.
What's the .338 ARC actually good for compared to .300 Blackout?
The .338 ARC delivers roughly 1.5 times the subsonic energy of .300 Blackout and uses a larger .338 bullet for more terminal damage. It's built for short-to-medium range work, with an effective hunting range around 200 yards on deer and hogs. Think of it as a beefier take on the same AR-15 subsonic concept.




Reviews
There are no reviews yet.