Description
Faxon built the Duty Series HBAR to be the workhorse of a serious AR-15 build, and it shows in the details. This 16-inch barrel is machined in-house from certified 4150 CMV steel, button-rifled with a 1:8 twist, and finished in black nitride inside and out. That heavy barrel contour adds mass right where it counts, keeping the bore stiff and cutting down on whip so your point of impact stays put even during longer strings of fire. Chambered in 5.56 NATO, it happily runs both 5.56 and .223 Remington, giving you plenty of flexibility whether you're plinking, training, or shooting for groups.
What Makes the Duty Series HBAR Barrel Tick
The 1:8 twist is the sweet spot for a general-purpose 5.56 barrel. It stabilizes the common 55 to 77 grain loads, so you can bounce between cheap bulk ammo and heavier match projectiles without babying it. The mid-length gas system is another smart touch on a 16-inch barrel. Compared to a carbine-length setup, it spreads out the pressure curve for a softer recoil impulse, smoother cycling, and less wear on your internals. Up front you get a 1/2-28 threaded muzzle that takes any standard brake, comp, or suppressor adapter, capped off with an 11-degree target crown for clean, consistent bullet release.
Building Around the Faxon 16-Inch HBAR
This barrel drops into any standard AR-15 upper thanks to the M4 barrel extension. The gas block journal is sized for a .750 gas block, and if you plan to run a can, an adjustable block is the way to go. Every Faxon barrel goes through a real quality process, not just an end-of-line glance. They're stress relieved, air-gauge tested, magnetic particle inspected, and headspace verified in-house before they ship. For a duty-minded build that puts accuracy and durability first without going overboard on weight, this is a barrel that earns its keep.
Key Specifications
- Manufacturer: Faxon Firearms
- Manufacturer Part Number: 15A58M16NHQ
- UPC: 816341028678
- Platform: AR-15
- Caliber: .223 REM / 5.56 NATO
- Barrel Length: 16"
- Profile: HBAR (Heavy Barrel)
- Material: 4150 CMV Steel
- Rifling: Button Rifled
- Twist Rate: 1:8
- Gas System: Mid-Length
- Gas Block Journal: .750"
- Muzzle Thread: 1/2-28 TPI
- Crown: 11-Degree Target Crown
- Finish: Black Nitride (inside & out)
- Barrel Extension: M4
What’s Included
- Faxon Duty Series 16in HBAR 5.56 NATO barrel
Frequently Asked Questions
What bullet weights work best with the Faxon Duty Series HBAR barrel?
The 1:8 twist is a true do-it-all rate for 5.56. It stabilizes common loads from roughly 55 to 77 grains, which covers bulk range ammo, defensive rounds, and heavier match projectiles. If you tend to shoot on the heavier end, this twist will treat you well.
Does this Faxon HBAR barrel come with a gas block or gas tube?
No, this is a bare barrel, so you'll need to supply your own gas block, gas tube, and muzzle device. The journal is sized for a standard .750 gas block, and it uses a mid-length gas tube. If you're planning a suppressed setup, an adjustable gas block is a smart pairing.
Will the Faxon Duty Series 16-inch barrel fit my AR-15 upper?
Yes. It uses a standard M4 barrel extension that fits any mil-spec AR-15 upper receiver. It also works with standard AR-15 bolt carrier groups, so you can build it out with the parts you already have.
Why choose the HBAR profile over a lighter contour?
The heavy barrel profile adds mass and stiffness, which reduces barrel whip and helps manage heat during longer shooting sessions. That translates to more consistent point of impact and tighter groups when you're running strings of fire. The tradeoff is a bit more weight up front, so it favors accuracy and durability over ultralight handling.




Reviews
There are no reviews yet.