Description
Faxon built the Integral Series to fix a headache every AR builder knows well. You want a rifle that handles like a shorter carbine, but you don't want to deal with pinning and welding a muzzle device or getting locked into one setup forever. This 16-inch Gunner barrel solves it by machining an A2-style flash hider directly into the barrel body. The rifled section runs 14.5 inches and the integral device carries it out to a true 16-inch overall length, so the whole thing reads as one solid piece of steel with perfect alignment and no separate parts to worry about.
What Makes the Faxon Integral Gunner Different
Because the flash hider is part of the barrel and machined slim, a gas block and barrel nut slide right over it. That means you keep full freedom to reconfigure your build down the road, which you simply don't get with a traditional pinned and welded setup. Change your handguard, swap your gas block, run a different rail, and the barrel stays exactly as it should. The A2 hider also gives you that classic AR-15 silhouette and solid flash suppression that shooters have trusted for decades.
Steel, Twist, and Gas on the 16" Gunner Barrel
The barrel is cut from 4150 chrome moly vanadium steel, the same alloy family the military specs for M4 and M16 barrels, and finished in nitride inside and out for corrosion and wear resistance. It runs a 1:8 twist, which stabilizes a wide range of loads from lighter 55-grain plinking ammo up through heavier 77-grain match rounds. The mid-length gas system is the right call for a 16-inch build, giving you a softer recoil impulse, gentler bolt carrier wear, and cleaner running when suppressed.
The Gunner profile is Faxon's most popular contour for good reason. It borrows Government-profile rigidity near the chamber and tapers down to a lighter pencil-style section out front, trimming weight where you don't need it while keeping mass to the rear for heat resistance and reduced whip. Every barrel is stress relieved, air-gauge tested, magnetic particle inspected, and headspace checked, and it's backed by Faxon's lifetime guarantee.
Key Specifications
- Manufacturer: Faxon Firearms
- Caliber: 5.56 NATO
- Overall Length: 16 inches
- Rifled Length: 14.5 inches
- Profile: Gunner
- Muzzle Device: Integral A2-style flash hider
- Gas System: Mid-length
- Twist Rate: 1:8 RH
- Barrel Material: 4150 CMV steel
- Finish: Nitride, inside and out
- Gas Block Journal: .625 inch
- Crown: 11-degree target crown
- Manufacturer Part Number: 15A58M16NGQ-IMDF
- UPC: 816341025097
What’s Included
- Faxon Integral 16" Gunner 5.56 NATO barrel with integral A2-style flash hider
Frequently Asked Questions
Does the Faxon Integral Gunner barrel need to be pinned and welded?
No. The A2-style flash hider is machined directly into the barrel, which brings it to a true 16-inch overall length on its own. There's no separate muzzle device to pin or weld, so no gunsmithing is required.
Can I still change my gas block and handguard with the integral flash hider?
Yes, and that's the whole point of the design. Because the flash hider is machined slim and is part of the barrel itself, a gas block and barrel nut slide right over it. You keep full freedom to swap handguards, gas blocks, or barrel nuts whenever you want.
What twist rate is the 16" Gunner barrel and what ammo does it like?
It runs a 1:8 twist with a mid-length gas system. That twist handles a broad spread of 5.56 loads, from lighter 55-grain range ammo up through heavier 77-grain match rounds, making it a versatile all-around choice.
Will this Faxon Integral barrel fit a standard AR-15 upper?
Yes. It uses a standard M4 barrel extension and drops into any mil-spec AR-15 upper receiver. Pair it with a mid-length gas tube and a .625 gas block for your build.





Reviews
There are no reviews yet.