$91.00
51 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Faxon built the Duty Series barrel for folks who want a real upgrade over their factory Glock 19 tube without turning it into a project. It's machined 100 percent in-house from stress-relieved 4150 CMV steel, the same mil-spec alloy Faxon uses in its duty-grade rifle barrels, then treated inside and out with a QPQ salt bath nitride finish for surface hardness, lubricity, and corrosion resistance. The result is a barrel that drops straight into a factory-spec slide and gives you a consistent, tighter-than-OEM lockup right out of the bag.
Glock factory barrels are cut to fairly broad tolerances, which is fine for reliability but leaves accuracy on the table. Faxon holds this one to closer specs with a SAAMI-spec 9mm chamber, an 11-degree target crown, and a 1:10 right-hand twist that stabilizes just about any bullet weight you'd feed a 9. The overall length lands at 4.020 inches, matching the stock G19 profile so slide-to-frame timing and holster fit stay exactly where you expect them.
The conventional button rifling is a big selling point here. Unlike polygonal factory barrels, this one is lead-safe, so you can run cast lead, coated, and plated bullets alongside your usual jacketed range and defensive loads. That opens up cheaper practice ammo and reloads without the buildup worries. Between the nitride-slicked bore and the tighter chamber, cycling tends to feel smoother and more repeatable across different ammo types.
This barrel is a true drop-in for Glock G19 Gen 2, 3, 4, 5, Gen 5 MOS, and the G19X, since all those generations share identical barrel dimensions. No fitting, no filing, no gunsmith. It's validated against Glock factory slide dimensions, and while it plays nice with most aftermarket slides cut to G19 spec, it's always smart to run a break-in of 50 to 100 rounds to confirm feeding and extraction with your specific load before you trust it for carry.
Yes. It's a true drop-in fit for Glock G19 Gen 2, 3, 4, 5, Gen 5 MOS, and the G19X, since all of those generations share identical barrel dimensions. No fitting or gunsmithing is needed in factory-spec slides.
You can. Faxon uses conventional button rifling instead of polygonal, so this barrel is lead-safe. That means cast lead, coated, and plated bullets are all fair game right alongside standard jacketed loads.
No, this particular model is non-threaded with a clean 11-degree target crown. If you want to run a suppressor or comp, Faxon offers the same Duty Series barrel in a 1/2×28 threaded configuration.
It's compatible with most factory and aftermarket slides cut to true Glock 19 spec, and it's validated against Glock factory dimensions across Gen 2-5. As with any barrel swap, run 50 to 100 rounds to confirm feeding and extraction with your load before relying on it for carry.
| UPC | 816341028456 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | GA910N19NGQ-N |
| Barrel Length | 4.02" |
| Caliber/Gauge | 9mm |
| Color | Black |
| Model | |
| Product Type | Barrel |
You must be logged in to post a review.
Reviews
There are no reviews yet.