0
0

iGaging EZ Data 0-1″ Digital Tube Micrometer with D-Type Ball Anvil

UPC: 080910170451

$63.99

23 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever tried checking case neck thickness with a standard flat-anvil micrometer, you already know the problem. A flat face rides across the curve of the brass and bridges the arc, so it reads thicker than the metal really is. The iGaging EZ Data tube micrometer solves that with a D-type ball anvil, an egg-shaped tip that makes point contact against the curved wall and gives you a true reading instead of an inflated one. That small design change is the whole reason reloaders reach for a tool like this.

The electronics do the rest. You get a resolution of 0.00005" (0.001mm) with rated accuracy of 0.00015" (0.003mm) across the full 0 to 1 inch range, all shown on a large easy-to-read LCD. The inch/mm button flips units on the fly, and absolute/incremental modes let you zero out to a reference and sort brass by variation instead of raw thickness. An IP54 rating keeps shop dust and the occasional splash out of the works, and the CR2032 battery gives you a long run before a swap.

What the EZ Data Ball Micrometer Does at the Bench

The ball anvil is slim enough to drop right into 22-caliber necks and larger, so you can spin the case and watch for high and low spots around the wall. Handloaders chasing consistent neck tension use it to catch runout and thickness swings that quietly open up groups. It doubles as a general tube and pipe wall gauge too, so it earns a spot on the bench even when you're not loading.

Getting the Most From This iGaging Tube Micrometer

Use the ratchet or friction thimble every time for consistent measuring pressure, which is where repeatability comes from on any mic. Many folks pair it with a mic stand so both hands are free to rotate the case. If you want to log numbers, the SPC data port sends readings to a cable or, with the optional 35-BT-28 dongle, wirelessly to a phone or PC.

Key Specifications

  • Manufacturer: iGaging
  • Manufacturer Part Number: 35-054-UT1
  • UPC: 080910170451
  • Measuring Range: 0-1" / 0-25mm
  • Resolution: 0.00005" / 0.001mm
  • Accuracy: 0.00015" / 0.003mm
  • Anvil Type: D-type egg-shaped ball anvil
  • Measuring Surfaces: Carbide
  • Display: Extra-large LCD
  • Reading Modes: Inch / Metric (mm), Absolute / Incremental
  • Ingress Rating: IP54 dust and water resistant
  • Data Output: SPC port (cable or optional Bluetooth dongle 35-BT-28)
  • Battery: 3V CR2032
  • Quantity: 1

What’s Included

  • iGaging EZ Data 0-1" digital tube micrometer with D-type ball anvil
  • 3V CR2032 battery
  • Protective storage case
  • iGaging warranty

Frequently Asked Questions

Why use this tube micrometer instead of a regular flat-anvil mic for case necks?

A flat anvil sits across the curved surface of a case neck and bridges the arc, which reports the brass as thicker than it really is. The D-type ball anvil on this iGaging mic makes point contact against the curve, so you get a true wall reading. That accuracy matters when you're sorting brass or turning necks for even tension.

Will the ball anvil fit inside small case necks?

Yes. The egg-shaped anvil is slim enough to reach inside 22-caliber necks and larger, so you can rotate the case and check for thickness variation all the way around. It works on the same range of tube and pipe walls too.

Can the EZ Data micrometer send readings to a computer or phone?

It has an SPC data output port for connecting a cable to a DRO or PC. If you'd rather go wireless to a phone, tablet, or computer, iGaging offers an optional Bluetooth dongle (part 35-BT-28) that plugs into the same port. The dongle is sold separately.

What kind of accuracy and resolution does this micrometer offer?

It reads to a resolution of 0.00005" (0.001mm) with rated accuracy of 0.00015" (0.003mm) over the full 0 to 1 inch range. Reloaders have found it repeatable enough to sort brass meaningfully and even measure it against high-end mics. Using the ratchet or friction thimble every time keeps your pressure consistent for the best repeatability.

Additional information

UPC

080910170451

Manufacturer

Manufacturer Part Number

35-054-UT1

Quantity

1

Resolution

0.001mm

Reviews

There are no reviews yet.

Be the first to review “iGaging EZ Data 0-1″ Digital Tube Micrometer with D-Type Ball Anvil”