Description
The iGaging EZ Cal earns its name with a display that's genuinely easy on the eyes. Where most calipers cram their numbers onto a squinty little screen, this one uses an extra-large LCD (roughly 2-3/8" by 7/8") so you can catch your reading without leaning in or hunting for your reading glasses. That alone makes it a favorite for anyone who spends long sessions at the bench checking case length, bullet seating depth, or overall cartridge dimensions.
Underneath the big screen is a properly built tool. The frame is hardened stainless steel with a precision lapped finish on the measuring surfaces, so it holds up to real shop use and gives you consistent contact every time. It measures a 0-6" range with 0.001" accuracy and reads down to a 0.0005" resolution, and it handles all four measurement types most people need: outside, inside, step, and depth.
Why the EZ Cal Reads Three Ways
One of the handier tricks here is the three-mode display. You can flip between decimal inch, metric, and fractional inch (down to 1/128"), which covers just about any project you'll throw at it. Reloaders and gunsmiths tend to live in decimal and metric, but the fractional readout is a real time-saver for woodworking, hobby, and general shop tasks. A locking screw lets you pin a measurement in place, and the zero-set function works at any point along the beam for quick comparison work.
Built to Survive the EZ Cal's Workspace
The IP54 rating is the part that separates this from a bargain caliper. It shields the internals against splashing water, oil, and dust, which matters when your workbench sees solvent, lube, and metal shavings. An auto-off feature helps stretch battery life out to roughly a year on the included CR2032, and it ships with a spare battery and a protective storage case so you're ready to measure straight out of the box.
For the money, it's a lot of caliper. Precision where it counts, a display you can read across the bench, and the durability to stay accurate through years of use.
Key Specifications
- Manufacturer: iGaging
- Manufacturer Part Number: 100-333-8B
- UPC: 080911003338
- Measuring Range: 0-6" / 150mm
- Resolution: 0.0005" / 0.01mm / 1/128"
- Accuracy: 0.001"
- Repeatability: 0.0005"
- Display: Extra-large LCD (approx. 2-3/8" x 7/8")
- Read Modes: Decimal inch, metric, fractional inch
- Measurement Types: Outside, inside, step, depth
- Frame Material: Hardened stainless steel, lapped finish
- Protection Rating: IP54 (splash water, oil, dust resistant)
- Battery: 3V CR2032
- Color: Stainless Steel
What’s Included
- iGaging EZ Cal 0-6" digital caliper
- CR2032 battery installed
- Spare CR2032 battery
- Instruction manual
- Protective storage case
Frequently Asked Questions
Is the iGaging EZ Cal accurate enough for reloading?
Yes, it's a common choice for the reloading bench. With 0.001" accuracy and a 0.0005" resolution, it handles case length, trim checks, bullet seating depth, and overall cartridge measurements with room to spare. The zero-set-anywhere function also makes quick comparison measurements easy.
What makes the EZ Cal different from a standard digital caliper?
The headline feature is the extra-large LCD, which is noticeably bigger than a typical caliper screen and much easier to read across the bench or without reading glasses. It also carries an IP54 rating for resistance to splashing water, oil, and dust, so it holds up better in a messy shop environment.
Can the EZ Cal switch between inches, metric, and fractions?
It reads three ways: decimal inch, millimeters, and fractional inch down to 1/128". You just toggle between modes depending on what your project needs, which makes it as useful for woodworking and general shop work as it is for firearms tasks.
Does the iGaging EZ Cal come with a battery and case?
It ships ready to use with a CR2032 battery installed plus a spare battery in the box. You also get an instruction manual and a protective storage case to keep it safe between jobs. Battery life runs roughly a year thanks to the auto-off feature.



Reviews
There are no reviews yet.