Description
Building a steel target setup does not have to mean welding brackets or piecing together chain and pipe. The Allen EZ-Aim Gong Hanger takes a standard 2×4 and turns it into a solid, repeatable stand for your favorite steel gong or small silhouette. It slips over the top of the board and locks down with a steel wedge that puts tension against the wood, and there are bolt holes so you can permanently fasten it once you have your spot dialed in.
The real trick here is the recoil spring. Instead of your target taking the full brunt of every hit, the spring absorbs some of that energy and lets the gong react and swing the way a hanging steel target should. That means more of that satisfying clang and swing you are after, and less abuse on your hardware over a long range day. It is built to work with most steel targets, and it plays best with plates that mount through a center bolt hole.
Why the EZ-Aim Gong Hanger Beats a DIY Setup
Plenty of folks have hung gongs off homemade rigs using chain, straps, or scrap conduit, and there is nothing wrong with that. The catch is that chain links can get severed by a stray rifle round and cobbled-together stands tend to be clumsy or tippy. This bracket gives you an engineered mounting point that keeps the target moving freely while the spring handles the shock, all without needing a welder or a run to the hardware store for random parts.
Setting Up the EZ-Aim Steel Gong Hanger
Grab a 2×4 at whatever height you want, drop this hanger on top, and cinch it down. Hang your steel, and you are shooting. When the wood eventually gets chewed up from misses, swapping in a fresh board is cheap and quick, which is a big reason the 2×4 stand design has stuck around at ranges for so long. It is a clean, no-fuss way to get reactive steel off the ground and ringing.
Key Specifications
- Manufacturer: Allen / EZ-Aim
- Manufacturer Part Number: 15515
- UPC: 026509060697
- Material: Steel
- Finish: Black
- Mounts To: 2" x 4" lumber
- Attachment: Steel wedge with bolt-on hardware
- Impact Absorption: Recoil spring assembly
- Target Compatibility: Most steel gongs and small silhouettes with center bolt hole
- Weight: Approx. 2.3 lbs
What’s Included
- EZ-Aim steel gong hanger bracket
- Recoil spring assembly
- Mounting bolts and hardware
Frequently Asked Questions
What does the recoil spring on the EZ-Aim gong hanger actually do?
The spring sits between the bracket and your steel and absorbs part of the energy from each hit. That reduces some of the shock on the target and hardware while still letting the gong react and swing when you connect. The result is a more consistent, reactive setup over a long shooting session.
Does the Allen EZ-Aim gong hanger come with a target or a 2×4?
No, this is just the mounting bracket, recoil spring, and hardware. You supply your own 2×4 and steel target. It is designed to work with most steel gongs and small silhouettes, and it works best with plates that have a center bolt hole.
How does the EZ-Aim hanger attach to the 2×4?
It slips over the top of the board and locks down using a steel wedge that creates tension against the wood. There are also bolt holes and hardware included so you can fasten it permanently once you have your height and location set. Cutting your 2×4 to whatever height you want lets you dial in the target position.
Why use a 2×4 stand instead of chains for a steel gong?
A 2×4 upright is cheap and easy to replace when misses chew up the wood, which makes it popular for ranges that see heavy use. Chains can get severed by a stray rifle round, while this bracket gives you a solid mounting point and lets the recoil spring handle the shock. It is a clean way to keep reactive steel off the ground and swinging.




Reviews
There are no reviews yet.