$14.85
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The stock extractor on a Ruger 10/22 gets the job done for casual plinking, but if you've ever fought a stuck case or run a tighter aftermarket chamber, you already know where the factory part falls short. This KIDD Innovative Design extractor is one of those small upgrades that punches way above its size, giving your bolt more bite on the rim so spent brass clears the chamber the way it should.
KIDD cuts this extractor from hardened A2 tool steel using wire EDM machining, holding tolerances down to two ten-thousandths of an inch. That kind of precision matters on a part this small, because the geometry of the hook is what actually grabs the rim and pulls the case free. The result is stronger, more consistent extraction, which is exactly what you want if you're running a match-grade barrel with a snug chamber where factory extractors tend to slip.
Swapping it in is a straightforward job for anyone comfortable pulling their bolt apart. The kit ships with both the extractor and its spring, so you replace the whole assembly at once rather than reusing worn factory pieces. Most folks can knock it out in a few minutes with a punch and a little patience. It drops into the standard 10/22 bolt as well as most aftermarket 10/22-style bolts, making it an easy add whether you're freshening up an old rifle or finishing a custom build.
For the money, this is one of the higher-value reliability upgrades you can make to a 10/22. Owners consistently point to fewer stovepipes and stuck casings after the swap, and it pairs naturally with other KIDD bolt components if you're building the platform out over time. It's a quality piece that earns its spot in any 10/22 owner's parts drawer.
Yes. It's designed to drop into the standard Ruger 10/22 bolt and also works with most aftermarket 10/22-style bolts. If you're running a custom build, this is a common upgrade that fits right in without modification.
It does. The package comes with both the extractor and its spring, so you're replacing the complete assembly rather than trying to reuse a tired factory spring. That's part of why it makes such a clean, worthwhile swap.
The KIDD extractor is cut from hardened A2 tool steel and machined to extremely tight tolerances, which gives it a more aggressive, consistent bite on the case rim. That translates to better extraction, especially in tighter match chambers where factory extractors can struggle with stubborn brass.
Not for anyone comfortable disassembling their 10/22 bolt. With a punch and a few minutes, most owners can complete the swap at home. If you've done any basic maintenance on the platform, you'll find this an easy job.
| UPC | 810132050046 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | KIDD-22EXTR |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.