0
0

Wilson Combat 80 Series 1911 Bullet Proof Extractor .45 ACP Stainless

UPC: 874218005719

$32.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

On a 1911, the extractor does a lot of quiet work. It's the part that grips the cartridge rim, pulls the spent case out of the chamber, and gets it moving toward the ejector. When it loses tension or the hook wears down, you start seeing failures to extract and erratic ejection. Wilson Combat built the Bullet Proof line to be the part you install and forget about.

This is the 80 Series version in stainless, fit for .45 ACP 1911s. The 80 Series designation matters: it has a plunger retainer stud machined into the extractor that holds the firing pin safety plunger in place on Colt-style Series 80 slides. An 80 Series extractor will also work in Series 70 guns, but a 70 Series part won't fit an 80 Series gun since it lacks that cut. Worth checking your slide before you order, and note that Kimber Series II pistols can run either type.

What Makes the Bullet Proof Extractor Different

Wilson machines these from solid bar stock and then heat treats them for toughness that resists chipping and breakage. The hook is optimized and the corners are radiused, which does two things: it feeds rounds more smoothly and it fights the wear that eventually kills a standard extractor. The full-diameter rear shaft is what holds tension over the long haul, so you're not re-tuning the gun every few thousand rounds.

Fitting Your Wilson Combat Extractor

The nice part is that these are designed to require minimal fitting. In plenty of guns they drop right in with only final tensioning needed, and some builders report no adjustment at all. That said, tolerances vary between manufacturers, so a little fitting is sometimes part of the deal. Pairing it with a Wilson Combat firing pin stop lets you dial in extractor function even further. If you're not comfortable tuning extractor tension, it's a quick job for any competent gunsmith.

Key Specifications

  • Manufacturer: Wilson Combat
  • Manufacturer Part Number: 415-80S
  • UPC: 874218005719
  • Model: Bullet Proof Extractor, 80 Series
  • Platform: 1911
  • Series: 80 Series (Colt-style)
  • Caliber: .45 ACP
  • Material: Heat-treated alloy/bar stock steel
  • Finish/Color: Stainless
  • Length: 4.65 in
  • Fitment Note: Also fits Series 70 guns; minimal fitting required

What’s Included

  • Wilson Combat 80 Series Bullet Proof Extractor (.45 ACP, stainless)

Frequently Asked Questions

Will this 80 Series extractor fit my Series 70 1911?

Yes. An 80 Series extractor works in both 80 Series and 70 Series guns because it has the plunger retainer stud that Series 80 slides need. A 70 Series extractor, on the other hand, won't fit an 80 Series gun since it lacks that machined cut. If you're unsure which slide you have, checking for the firing pin safety plunger next to the disconnector rail is a good tell.

Does the Bullet Proof extractor drop right in or does it need fitting?

These are designed for minimal fitting, and in many 1911s they drop in with just final tensioning. Some builders report no adjustment needed at all. Because chamber and slide tolerances vary between manufacturers, occasional fitting is part of the process, so plan on setting extractor tension for reliable operation.

Why choose a Wilson Combat extractor over the factory part?

The extractor is arguably the most important reliability part in a 1911, and factory pieces tend to lose tension over time. Wilson machines the Bullet Proof from solid bar stock and heat treats it to resist chipping and hold tension far longer. The optimized hook and radiused corners also help it feed smoother and last through more rounds.

Should I pair this extractor with anything else?

Running it alongside a Wilson Combat firing pin stop lets you optimize extractor function on just about any 1911. The two parts work together to fine-tune how the case rim is held and released during the cycle. It's not required, but it's a common pairing for folks chasing maximum reliability.

Additional information

UPC

874218005719

Manufacturer

Manufacturer Part Number

415-80S

Caliber/Gauge

.45 Caliber

Color

Stainless

Length

4.6500

Reviews

There are no reviews yet.

Be the first to review “Wilson Combat 80 Series 1911 Bullet Proof Extractor .45 ACP Stainless”