0
0

Devcon Plastic Steel Epoxy Putty (A) 1 lb – Rifle Bedding Compound

UPC: 078143101106

$102.99

36 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Ask a gunsmith what they reach for when a rifle needs a proper bedding job and Devcon Plastic Steel Putty comes up over and over. It's a metal-filled, two-part epoxy that mixes into a stiff, peanut-butter consistency and packs into the action area without running all over the place. That thickness is exactly what you want when you're setting a barreled action into a stock and need the compound to stay where you put it, filling voids, machine marks, and the gaps between wood or synthetic and metal.

Why Gunsmiths Trust This Steel Putty for Bedding

The standard Plastic Steel Putty (A) is the original metal-filled epoxy, and it earned its reputation on strength and stability. It cures at room temperature into a tough metallic mass with minimal shrinkage, which is the whole ballgame when you're chasing a repeatable zero. You get a roughly 45-minute working time, so there's no frantic rush during the pour, and it sticks aggressively to itself if you scuff the surface between layers. Once set, it can be drilled, tapped, filed, and machined, which makes cleaning up the trigger and magazine well areas after the fact a straightforward job.

Getting the Most Out of Your Devcon Epoxy Putty

A little prep goes a long way here. Lay down plenty of release agent on your action and only where you want it, because this stuff bonds hard and you do not want a surprise. Mix by volume or by weight following the included instructions, fold rather than whip so you don't trap air pockets, and take your time. It's dark gray and cannot be tinted, so it shines for hidden bedding work rather than visible cosmetic repairs on a finished stock.

Beyond bedding, the same can handles general metal repair around the shop. It bonds to most metals, concrete, and some plastics, and shrugs off oil, gasoline, water, and a long list of chemicals, so it's handy for patching parts where welding or brazing isn't practical.

Key Specifications

  • Manufacturer: Devcon
  • Manufacturer Part Number: 230-10110
  • Model: 10110 / Plastic Steel Putty (A)
  • UPC: 078143101106
  • Product Type: Two-Part Steel-Filled Epoxy Putty
  • Net Weight: 1 lb
  • Color: Dark Gray
  • Consistency: Putty / Paste
  • Working Time: Approximately 45 minutes
  • Machinable: After about 4 hours
  • Full Cure: 16 hours at 75°F (faster with applied heat)
  • Cure Type: Room Temperature
  • Compressive Strength: 8,260 psi
  • Hardness: 85 Shore D
  • Max Thickness: 1/4 in
  • Resistance: Oil, gasoline, water, and many chemicals

What’s Included

  • 1 lb can of Plastic Steel Putty resin (white)
  • Putty hardener (dark gray)
  • Mixing instructions

Frequently Asked Questions

Is Devcon Plastic Steel Putty good for rifle bedding?

It's one of the most trusted bedding compounds among gunsmiths and precision builders. The steel-filled epoxy cures hard with minimal shrinkage, which helps a rifle return to zero and hold it. Its stiff, non-running consistency also makes it easier to control during the pour than thinner liquid compounds.

How long is the working time on this Devcon steel putty?

You get roughly 45 minutes of working time once the resin and hardener are mixed. That's a comfortable window to seat an action and clean up the excess without feeling rushed. It becomes machinable in about 4 hours and reaches full cure in around 16 hours at room temperature.

Can the Devcon epoxy putty be drilled or machined after it cures?

Yes. Once cured it forms a tough metallic mass that can be drilled, tapped, filed, and machined. Builders often use this to clean up bedding around the trigger and magazine well after the compound sets.

What should I use as a release agent with this bedding compound?

A quality paste wax or a dedicated bedding release agent works well, and you'll want more than one coat on any surface the epoxy could touch. This putty bonds aggressively, so cover every area where you don't want it to stick. Take your time masking off the action before you start the pour.

Additional information

UPC

078143101106

Manufacturer

Manufacturer Part Number

230-10110

Product Type

Epoxy

Reviews

There are no reviews yet.

Be the first to review “Devcon Plastic Steel Epoxy Putty (A) 1 lb – Rifle Bedding Compound”