Description
Devcon Aluminum Putty (F) has earned a spot on plenty of gunsmith benches for good reason. It's an aluminum-filled two-part epoxy that mixes into a firm, trowel-able paste and cures into a hard, non-rusting compound that holds tight and shrinks very little. For anyone bedding a rifle action, setting pillars, or filling voids in metal, this is one of those old-reliable materials that keeps showing up in shop after shop.
Why the Aluminum Putty Earns Its Keep in Bedding Work
The aluminum fill gives this putty a lighter feel than the steel-filled Devcon, which matters if you're working with a carbon fiber or lightweight stock and want to keep ounces off the build. Mix the resin and hardener together, pack it into the inletting, drop your action on a properly waxed surface, and let it cure. Guys who bed rifles regularly like it because it stays put where you place it and doesn't run all over the place like thinner epoxies. Once fully cured, it can be sanded, drilled, and tapped with conventional metalworking tools, so cleanup and touch-up work is straightforward.
What Makes This Devcon Aluminum Putty Different
Beyond the bench, this is genuinely an industrial repair compound. It bonds to aluminum and most other metals, fills porosity in castings, and stands up to chlorinated solvents and harsh chemicals, which is why it's a go-to in HVAC and equipment repair. It meets MIL-PRF-24176C, Type II, and carries a tensile strength around 2,600 psi with a Shore D hardness near 85. Working time runs about 60 minutes, with a full cure in roughly 16 hours at 75 degrees F.
Getting the Best Results
A few tips from the crowd that uses this stuff: mix your ratio carefully, because a bad mix can leave it soft and you'll have to dig it out. Always use a quality release agent on your metal, plug any holes around the trigger area with plumber's putty, and give it a couple days before pulling the action for the cleanest release. Do it right and you get a solid, repeatable bedding job that lasts.
Key Specifications
- Manufacturer: Devcon (ITW Performance Polymers)
- Manufacturer Part Number: 230-10610
- Model: 10610 / Aluminum Putty (F)
- UPC: 078143106101
- Product Type: Aluminum-Filled Epoxy Putty
- Container Size: 1 lb Can
- Color: Aluminum / Gray
- Form: Paste
- Working Time: About 60 minutes
- Full Cure: 16 hours at 75 degrees F
- Tensile Strength: 2,600 psi
- Compressive Strength: 8,420 psi
- Hardness: 85 Shore D
- Max Service Temp: 250 degrees F
- Specification: MIL-PRF-24176C, Type II
- Machinability: Can be machined, drilled, or tapped
What’s Included
- 1 lb can of Devcon Aluminum Putty (F)
- Resin
- Hardener
Frequently Asked Questions
Is Devcon Aluminum Putty good for bedding a rifle action?
Yes, it's a longtime favorite among people who bed rifles. The putty consistency stays where you place it instead of running, and it cures hard with very little shrinkage. Many prefer the aluminum version over the steel-filled putty when working with lightweight stocks since it keeps the weight down.
How long does the Devcon aluminum putty take to cure?
You get roughly 60 minutes of working time to mix and place it, and it reaches a full cure in about 16 hours at 75 degrees F. For bedding jobs, a lot of folks wait a full two days before pulling the action to get the cleanest release. Warmer temperatures speed things up, cooler temperatures slow them down.
Can this putty be machined or drilled after it cures?
It can. Once fully cured, the aluminum-filled epoxy can be machined, drilled, or tapped using conventional metalworking tools. That makes it handy for filling voids in castings or building up material that needs to be shaped and threaded afterward.
What should I use as a release agent with Devcon Aluminum Putty?
A good release agent is a must so your action separates cleanly from the cured epoxy. Common choices include paste wax, Kiwi shoe polish, or a dedicated bedding release agent, and plumber's putty works well for plugging holes around the trigger area. Skip this step and you risk the action locking into the bedding.





Reviews
There are no reviews yet.