Description
At 6.8 inches long and right around 16 ounces, the EOTECH Vudu 3-9×32 is roughly the length of a stripped AR upper, which is wild when you consider it's still a genuine 3-9x scope. This tan MR5 model runs a second-focal-plane reticle in a 30mm forged aluminum body with a 32mm objective, and instead of clamping rings around a tube, the bottom of the housing is a mini-ACOG interface. EOTECH includes a Picatinny adapter that puts your line of sight about 1.5 inches over the rail, which is a nice height for pairing with night vision or a thermal clip-on down the road.
What the MR5 Reticle Brings to the Table
The MR5 is new for the tan Vudu and it's a MIL-based grid with a fine floating center dot plus holdover and windage references built in. That layout lets you range, hold for elevation, and correct for wind without touching a turret, which is handy on a scope meant to move fast. Being second focal plane, the reticle stays the same visual size as you zoom, so your subtensions are dialed in at max power. Illumination comes from a rotary dial with 10 brightness settings and an off position between each, and it's fed by a single CR2032 good for roughly 300 hours.
Glass and Build on the Vudu 3-9×32
The glass is XC high-density, low-dispersion, multi-coated stuff, and reviewers consistently call it crisp and clear edge to edge with accurate color. The single-piece aluminum tube is nitrogen-purged and sealed against fog, water, and dust, and it's been dunked, frozen, and dropped in testing without losing zero. Capped 1/4 MOA turrets keep your setting protected between hunts or range trips, and there's a generous elevation and windage range to work with.
Where the Tan Vudu MR5 Fits
This one shines on lightweight AR builds, .300 Blackout guns, and short-action bolt rifles where every inch and ounce counts. If you've been eyeing a compact optic that gives you more reach than a red dot or LPVO but won't turn your carbine into a boat anchor, the tan MR5 Vudu is squarely in that lane.
Key Specifications
- Manufacturer: EOTECH
- Model: Vudu
- Manufacturer Part Number: VDU3-9MR5TAN
- UPC: 672294110460
- Magnification: 3-9x
- Objective Diameter: 32mm
- Tube Diameter: 30mm
- Focal Plane: Second Focal Plane (SFP)
- Reticle: MR5 (MIL-based)
- Turret Adjustment: 1/4 MOA, capped
- Illumination: Rotary dial, 10 brightness settings
- Battery: CR2032 (approx. 300 hours)
- Eye Relief: 2.3 to 3.1 inches
- Field of View @ 100 yds: 38 ft at 3x / 12.7 ft at 9x
- Overall Length: 6.8 inches
- Weight: 16 oz
- Construction: Aircraft-grade aluminum, single-piece
- Color: Tan
What’s Included
- Vudu 3-9×32 SFP riflescope (tan)
- Integrated mini-ACOG base with Picatinny adapter
- CR2032 battery
- Operator and reticle manuals
- Lens cloth
- Lens covers
Frequently Asked Questions
How does the EOTECH Vudu 3-9×32 mount to a rifle?
Instead of using traditional scope rings, the bottom of the housing is a mini-ACOG interface. EOTECH includes a Picatinny adapter that clamps right to your rail and sets the centerline about 1.5 inches above it. That height plays nicely with night vision or thermal clip-on setups, and it's also compatible with most aftermarket mini-ACOG mounts if you want to swap.
What's the difference between the MR5 reticle and the original HC1?
The MR5 is the newer reticle option and uses a MIL-based grid with a fine floating center dot plus holdover and wind references built in. The original HC1 is a simpler MOA crosshair with hash marks and a center dot. The MR5 gives you more built-in reference for ranging and corrections without dialing, which many buyers were asking for.
Is the Vudu 3-9×32 second focal plane or first focal plane?
This is a second focal plane (SFP) scope, meaning the reticle stays the same visual size no matter what magnification you're on. The MR5 subtensions are calibrated to be accurate at max 9x power. SFP designs like this tend to keep the reticle easy to see and read across the whole zoom range.
What kind of rifle is the tan Vudu MR5 best suited for?
It's built for lightweight and short-receiver setups where size and weight matter, so think AR-15s, .300 Blackout builds, and short-action bolt guns. At 6.8 inches and 16 ounces it adds very little length or weight to your rifle. It's a good fit if you want real 3-9x magnification without the bulk of a full-size scope.





Reviews
There are no reviews yet.