$20.00
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who has tried to break a carbon-locked mount free knows the problem: you need serious clamping force on the suppressor body, but a bare vise will chew up the finish in seconds. Wrapping the can in a rag and hoping for the best is a gamble. The Energetic Armament VOX BLOX solves it the right way. It is a soft jaw vise block machined from high-density polyethylene, sized specifically for suppressors with a 1.48 inch outer diameter, which makes it a natural match for the SilencerCo Omega 9K and Omega 45K.
HDPE is the same tough, slick plastic used for cutting boards and machinery wear parts. It is rigid enough to transfer real clamping pressure from your vise to the suppressor body, but soft enough that it will not scratch, gall, or mar Cerakote and anodized finishes. Because the block is contoured to the can's diameter, the load spreads evenly around the tube instead of pinching at two points. That means you can put honest torque on a stubborn direct thread adapter or piston housing without the suppressor spinning in the jaws or coming out looking like it lost a fight.
This is the EA48 block in Energetic Armament's twelve-size VOX BLOX lineup, which runs from 1.00 inch up to 2.00 inches to cover most popular suppressor platforms. The clamp ears have a little spring to them, so a can measuring up to roughly ten thousandths over the listed size will still seat. If your suppressor runs a bit under, a thin shim like a strip of tape or paper takes up the slack. Check your can's published outer diameter before ordering and you are set.
For the money, this is one of those tools that pays for itself the first time you service a suppressor. Whether you are swapping mounts, pulling an end cap, or just doing routine cleaning, the VOX BLOX gives you a stable, no-drama grip on gear you spent real time and paperwork acquiring.
Yes, that is exactly what this size was made for. The 1.48 inch VOX BLOX matches the Omega 9K's outer diameter, and it also works with the Omega 45K and other cans measuring 1.48 inches. The clamp ears flex slightly, so suppressors up to about 0.010 inch over that measurement will still seat properly.
That is the whole point of the tool. The block is made from high-density polyethylene, which is much softer than the suppressor tube, so it grips without scratching Cerakote or anodizing. It spreads clamping force around the body instead of pinching it at two points like bare steel vise jaws would.
Energetic Armament recommends shimming the gap. A strip of masking tape or heavy paper handles a thin gap, while a piece of rubber or leather works for a larger one. If the difference is significant, you are better off grabbing the correct size, since the VOX BLOX lineup covers twelve diameters from 1.00 to 2.00 inches.
Slow, steady torque often will not do it once carbon has set up in the threads. With the suppressor secured in the VOX BLOX, put a wrench on the mount and give it a sharp tap with a hammer in the loosening direction. That impact-style shock breaks stuck threads free without putting sustained twisting stress on the tube.
| UPC | 853406008480 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | EA48 |
| Model | |
| Product Type | Tool |
| Color | White |
You must be logged in to post a review.
Reviews
There are no reviews yet.