Description
The Hornady ELD-VT in .224 diameter, 62 grains, is one of those rare projectiles that refuses to pick a lane. It pairs the sleek aerodynamics of a low-drag match bullet with the light weight and high velocity you want from a dedicated varmint bullet, so you get a true dual-purpose component that performs on paper at distance and turns in dramatic terminal results on small game. It carries a G1 ballistic coefficient of .395 and a G7 of .199, with a sectional density of .177, and Hornady lists it as polymer tipped with a boat tail design.
What Makes the ELD-VT .224 62gr Tick
The standout here is the Heat Shield tip. On a lot of polymer-tipped bullets, the tip softens from aerodynamic friction in flight and that throws off consistency at longer ranges. The Heat Shield material resists that heating and holds its shape, which keeps drag low and flight predictable all the way to the target. Pair that with a long, match-style profile and a reduced core-to-bullet length ratio that moves the center of gravity rearward, and you get a projectile built to buck wind and hold tight groups.
Terminal Performance You Can See
Where the ELD-VT 62 grain earns its keep is on impact. The polymer tip drives rearward through the large internal air gap and into the core, triggering rapid and dramatic fragmentation. That reaction happens even at lower velocities, which is a big deal when you're reaching out past a few hundred yards and the bullet has shed some speed. It's the kind of energy dump that makes it a favorite for prairie dogs, ground squirrels, and other varmints.
Loading the ELD-VT for Your .22 Rifle
This is a .224 diameter component bullet meant for handloaders running cartridges like .223 Rem, .22-250, .22 ARC, or .22 Creedmoor. A faster twist barrel, generally in the 1-in-8 range, will stabilize this weight best. If you're already loading precision .22 centerfire and want one bullet that does double duty between the match line and the field, this is a strong pick.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 22762
- UPC: 090255227628
- Caliber: .22 Caliber
- Bullet Diameter: 0.224 in
- Bullet Weight: 62 grains
- Bullet Style: ELD-VT Polymer Tipped Boat Tail
- Ballistic Coefficient (G1): .395
- Ballistic Coefficient (G7): .199
- Sectional Density: .177
- Recommended Twist Rate: 1-8 in (caliber dependent)
- Quantity: 100 per box
- Application: Match / Target / Varmint
What’s Included
- 100 Hornady ELD-VT .224 diameter 62gr polymer tipped boat tail bullets
Frequently Asked Questions
What cartridges can I load the ELD-VT 62gr .224 bullet in?
This is a .224 diameter component bullet, so it works in any .22 centerfire cartridge you handload, including .223 Rem, .22-250, .22 ARC, and .22 Creedmoor. It is sold as unloaded projectiles, not finished ammunition, so you'll need your own cases, primers, and powder. Always work up loads using current published reloading data for your specific cartridge.
What barrel twist rate stabilizes the 62 grain ELD-VT best?
A faster twist is the way to go with this bullet weight, and Hornady lists a 1-in-8 twist as the reference. Most modern .223 and .22 centerfire barrels in a 1-7 or 1-8 twist will stabilize the 62 grain ELD-VT well. Slower twist barrels around 1-9 or 1-12 may struggle to keep it accurate.
Is the ELD-VT good for both target shooting and varmint hunting?
That's exactly what it's built for. The ELD-VT pairs low-drag match bullet aerodynamics with the light weight and velocity of a varmint bullet, so it holds tight groups at distance and fragments rapidly on impact. It's a solid single choice if you don't want to swap bullets between the match line and the field.
What does the Heat Shield tip do on the ELD-VT?
The Heat Shield tip resists the aerodynamic heating that deforms ordinary polymer tips in flight. By holding its shape, it keeps drag low and flight consistent all the way downrange, which helps long-range accuracy. On impact it also drives rearward into the core to kick off rapid fragmentation.





Reviews
There are no reviews yet.