Description
This Ed Brown kit brings together the core components you need for a quality trigger job without having to hunt down parts individually. You get the famous Perfection Hammer and matched Perfection Sear, both fully machined from barstock steel with heat treatment to 50-54 Rc hardness. These two pieces work together from the ground up, so you're not guessing whether they'll mate properly.
Precision Machined Components Built for Real Use
Every part here comes machined from solid barstock rather than cast, which means better material consistency and durability under the bearing loads that a custom trigger experiences. The hammer features a Commander-style spur with fine serrations, narrowed sides to reduce slide drag, and a lowered strut pin hole that takes pressure off the sear spring. Hammer hooks come pre-machined at 020-022 inches with square edges, ready for just a light stoning if you want to fine-tune the pull. The sear is precision EDM cut and comes with the hammer contact angle already prepped, so you're starting with parts that fit together properly rather than requiring major hand work.
What You're Really Getting
The 811-M Disconnector here is fully machined from barstock steel, not cast like many factory parts. It includes narrowed sides and a lowered strut pin hole to minimize drag, and it's heat-treated for long-term durability. The 822 Sear Spring is high-quality tempered steel with extra length on the center leg, which lets you dial in disconnector engagement and pull weight precisely. You also get the 816 19# Mainspring, a lighter option than factory that still reliably sets off even hard primers. Factory mainsprings typically need replacing every 3,000-5,000 rounds anyway, so starting with Ed Brown's 19# gives you better performance right out of the box.
Works With Nearly Everything
This kit fits all standard 1911 pistols including Hi-Capacity models and 9mm variants. The components are compatible with both blued and stainless frames, aluminum frames, and bobtail housings. You're not locked into one platform or configuration.
Key Specifications
- Manufacturer Part Number: 896-KIT-5
- UPC Code: 800732896021
- Manufacturer: Ed Brown
- Hammer Material: Alloy Steel (heat treated Rc 52-54)
- Sear Material: 4340 Tool Steel (heat treated Rc 50)
- Disconnector Material: Machined Bar Stock Steel (heat treated)
- Mainspring Weight: 19 pounds
- Mainspring Service Life: 3,000-5,000 rounds
- Sear Spring Type: High-quality Tempered Steel
- Hammer Style: Commander-style with finely serrated spur
- Compatibility: All 1911 pistols including Hi-Capacity and 9mm models
- Hammer Hooks Pre-machined: 020-022 inches, square edges ready for light stoning
- Shipping Weight: 0.065 lbs
What’s Included
- 896 Perfection Hammer (barstock machined, heat treated)
- 874 Perfection Sear (precision EDM cut)
- 811-M Perfection Disconnector (fully machined from bar stock)
- 822 Sear Spring (high-quality tempered steel)
- 816 19# Mainspring
Frequently Asked Questions
Does this Ed Brown kit work with all 1911 pistols?
Yes, this trigger pull kit is designed to work with all standard 1911 pistols including Hi-Capacity models and 9mm variants. It's compatible with blued steel, stainless steel, aluminum frames, and bobtail housings. Always verify your specific pistol is in working order before installation.
Will this trigger kit require a gunsmith to install?
The parts are engineered to be drop-in ready with minimal fitting. The hammer and sear are already matched, and the sear hooks come pre-machined and ready for light stoning if needed. Many users have installed these successfully themselves, though you may want a light hand with stones or a rotary tool to polish the engagement surfaces. A function check after installation is always recommended.
How often should I replace the mainspring in this kit?
Ed Brown recommends replacing the mainspring every 3,000-5,000 rounds depending on use and environmental factors. The 19# mainspring included here is lighter than factory spec, which gives you a better trigger feel while still having plenty of power to reliably set off primers. You'll know when it's time by noticing reduced reliability or harder trigger pull.
What's the actual trigger pull weight I'll get with this kit?
The final pull weight depends on how you set up the sear spring and how much stoning you do on the hammer hooks. This kit is designed to deliver a clean break with minimal creep, but the exact weight is adjustable based on your preferences and setup. The sear spring has extra length on the center leg specifically for fine-tuning the pull to your liking.




Reviews
There are no reviews yet.